fbpx

Showing all 11 results

  • Alert Press

    The button can be used in a fixed place or with a geolocation service activated.
    When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on.

  • Agriculture

    Animal Tracker

    This collar can be used in any kind of animal.

    It is composed by a wireless sensor that transmits their location in a periodical way.

    Can be used with 5 geofences for each sensor.

    It sends notifications via email and SMS.

  • Cold Tracker

    Wireless sensor installed in refrigerators for monitoring temperature in a periodical way.

    In addition, it senses the refrigerator’s location.

    It sends notifications via email and SMS.

  • Datalog IOT

    Multi sensor device for remote monitoring system
    Intelligent and easy configurable APP and WEB monitoring applications, plus local sensing devices set for humidity and temperature measuring.
    To expand base sensing capabilities, solicit any desired sensor (such as PT100 RTDs, Thermocouples, CO2 sensors, etc.) to OEM.

    Features
    + Visualization
    + Responsive WEB and APP interface for visualization of:

    • Sensed variable state.
    • Battery level.
    • AC connector.
    • Sigfox signal quality.
    • Graphic record of each variable for up to 2 years.

    + External alarms by SMS, e-mail and Telegram messaging service.

  • Agriculture

    Digitanimal

    Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.

  • Electronic Active Seal

    Our security electronic seal makes easier, faster, cheaper and safer, the chance to have a real-time notification over the opening or violation of cargo or any kind of seal, by using an opening alarm generated by the security electronic seal.

    The installation is quite simple and an important difference from other current solutions is that it is not necessary to spend money into inverse logistics because it is designed for one use only.

    Besides the opening notification, the security electronic seal lets the user monitor the container during established periods of time, showing the seal permanency and the active status of the seal. Its autonomy can last 30 days, but this time depends on the design of each project and the regularity of the transmission.

  • iButton

    iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.

  • ILIGHT

    ILIGHT

    iLIGHT is a device for the proper management of streetlights. The equipment can work autonomously, it switches on or off according to the level of light in the environment, it can also work in a controlled manner, in which the equipment is instructed to turn on or off the lights and for how long.

  • Iris Hidroconta

    Iris

    IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.

    Sensorization
    IRIS devices allow consumption detection in two possible ways:
    • Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
    • Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.

    Communications
    IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
    In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
    In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.

    Functionality
    Operating profiles based on the requirements for recording historical consumption and communications.
    • Normal-24: Sending data every 24 hours and recording every hour.
    • Normal-8: Sending data every 8 hours and recording every hour.
    • Medium: Data is sent every 12 hours and registration every 30 minutes.
    • Extreme: Sending data every 6 hours and recording every 15 minutes.

    Alarms
    Detection of alarms and their dispatch. Supported alarms:
    Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
    Under-dimensioned meter alarm    : The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
    Leak alarm    : The alarm is activated in the event that continued consumption is detected for a maximum period of time.
    Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
    Counter stopped alarm    : The alarm is activated in the event that no consumption is detected for a maximum period of time.
    Battery status alarms    : Various battery alarm levels are activated depending on the remaining autonomy.

    Communications
    The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.

    From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
    etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.

    Data collection and management
    • Access to a large amount of data recorded by the system
    • Advanced data analysis from consumption graphs.
    • Direct access to information from temporary records.

    Web system
    • Detection and management of alerts for the detection of error situations and their agile solution.
    • Running automatic programs
    • Security and privacy in access to information guaranteed at various levels.

    For more information visit: https://hidroconta.com/

  • MOTO TRACKER

    Wireless sensor installed in motorcycles that transmits their location in a periodical way. Is it possible to activate up to 5 geofences for each sensor. It sends notifications via email and SMS.

  • Quamtra Smart Waste Management

    Quamtra Smart Waste Management

    This IoT solution is based on smart devices (the Q and MiniQ sensors) that constantly measure the fill level of the garbage containers, the temperature inside them, the inclination, the movement and even their location. This data is sent to the platform that allows the creation of reports and alerts to transform it into actions by those responsible for the management.