Showing all 18 results
-
Devkit V2.0
Get Sigfox-on board with this all-features Development Kit. Connect more than 8 sensors and empower your IoT curiosity & skills, even if you are not a hardware-genius. Exclusively designed for tech startups, tech lovers, design houses, schools & universities, and anybody who wants to jump in IoT and make their ideas a prototype in less than an hour.
Programm it in IDE Arduino. The IoT made easier than easy.
-
Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.
-
Dry Contact Sensor
The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.
-
GOBLIN 2 Plus Sigfox
Embrace the possibilities of the IoT.
Lower energy consumption due to simplified network communications. Affordable data plan prices that can go as low as 5 USD a year, transmitting up to 140 messages a day. -
GPS Antijammer IOTR-AJ-001
Designed to detect and act in the presence of a cell phone blocker. Upon detection of a cellphone blocker, a safety protocol will be activated to ensure that the vehicle or transport is recovered.
When it detects a jammer, it will continue to send location information since its
technology allows it to be visible even with Jammer present.This device will send critical information about the
status and gps position so that in a time not exceeding 20 minutes the unit can be located safely.The price includes 1 year of service and connectivity, tracking platform.
Self-management Tracking Platform
Easy to access
Easy installation
1 year warranty against manufacturing defects– Alerts for Jammer’s presence
– Historic up to 90 days
– Programmable reports
– Email alerts, on screen / SMS. -
HALWATER
HALWATER – Water Pressure and Level System
The new generation of water industry solutions designed with best of breed hardware and the power of 4.0 technology.
Water Industry Smart Devices
Halwater has designed enhanced measurement devices that can log data, control valves and they can communicate with the most popular SCADA systems. With our cloud platform you can see in real time the data and configure sectors from any computer, smartphone or tablet with a web browser.
Halwater uses bleeding edge algorithms developed by worldwide recognized engineers in the water industry in order to find inefficiencies and take action in the water network. Plus, we provide AI insights to find tendencies and predict behaviors. -
-
KRAKEN
KRAKEN is a precise and complete water quality control system.
It combines hardware and engineering in a single device capable of detecting variations in the properties of water and it is designed to be implemented in any environment. The impact of KRAKEN reduces costs in water maintenance and increases productivity. Notify the exact water conditions in different places through your mobile app. It is ideal for industrial systems, hydrological plants and any company. Its operation is continuous, and allows you to monitor and make decisions at any time and from any place, reducing costs and working time. -
MeteoHelix® IoT weather station
We shrunk a professional solar powered meteorological weather station costing 2950 EUR into a compact micro-weather station costing 1/6th the price using new IoT wireless technologies and sensors. Featuring a patented helical design, MeteoHelix® is the only micro-weather station able to meet quality standards for climatic observations in all weather conditions as set by the World Meteorological Organization (WMO). Measures temperature, humidity, pressure, sun intensity (irradiation), rain. MeteoWind sensor coming soon.
allMETEO Web portal is free with the purchase of a MeteoHelix® personal weather station by BARANI DESIGN Technologies.
-
Miniac: Service Button
The one-in-all button. Device + Platform.
Push the button to trigger customizable notifications to alert self-defined recipients.
Rich notifications available (SMS, Instant Messaging…)
Price includes hardware and 1 year of Sigfox connectivity & Miniac (Software).Get in touch:
vtrueba@nxtiot.io
www.nxtiot.ioFind it in-store:
http://www.nxtiot.io/index.php/store/Botones-c30530005 -
MS1001S-RCZ2 / RCZ4
Electric Power Meter for 240V/100A service. To IEC Class 1 but calibrated at under 0.5%. Sigfox Downlink control of Uplink Interval and Relay status. Uplink data includes Active Energy (kWh), Current (Arms), Voltage (Vrms), Active Power (kW), Reactive Power (kVAR), Power Factor. 10 Uplink intervals selectable from every 12 minutes to once every 24 hours.
With optional dashboard display for the Data needed. -
SCRAPIoT
Device to measure the content level of a container.
We developed a cheap and efficient device, to make it accessible and profitable in Mexico and South America.
Batteries can last up to 7 years depending on how often the measurement is sent. It has a very low maintenance cost. In addition, the protective box is hermetic, allowing its use outdoors.
-
Smart – PLUG monitor
Sigfox Controlled Switch with many additional functions, Reset, ON/OFF, Current Sensor(Amps), Last Gasp Function to send connected Status, etc.
Use cases, Data Centers, Base Stations monitoring.
For more information please contact us:
contacto@iot-robotix.mx
www.iot-robotix.mx
www.iotshop.mx -
ST730
Portable asset tracking device.
The ST730 combines the Sigfox techonology, the GNSS location, Wifi and other sensors with the Suntech International strong development expertise to bring the first product into the LATAM market to use the Sigfox network.
It features:
+ Periodic location reporting
+ Event triggered reporting
+ Message content customization
+ Local and remote configuration
+ GNSS and Wifi fences
+ Local firmware update -
TagoIO IoT Cloud Platform
TagoIO offers an end-to-end cloud platform that transforms the way businesses create value from connected products.
TagoIO integrates advanced device management, data storage, visualization, analytics, and more. It requires a minimum effort for setup and operation. Under the PaaS model, Tago contains all the functionalities to perform: device management, data storage, real-time data visualization, custom analytics, and notifications. To accelerate the time-to-market, Tago comes with a mobile App and a white-label option to enable higher level of customization.
Our well-designed User Interface allows non-technical personal to prepare and sell solutions quickly and easily. From our headquarters in Raleigh, NC, USA, we support local and international businesses to build the best solution.
-
UnaProtect
Protect uses a magnetic sensor to detect opening and closing of doors , windows or drawers. Designed to remotely monitor your assets or access to places.
Easy to set up.
Low cost and high performance.
Small and compact.
Low power consumption.
Plug and play.
Reliable detection. -
WISOL Breakout Board
Not everyone needs the LEDs on the breakout, so by offering this product we can reduce the cost of starting on the Sigfox Network.
This is a breakout board with the Wisol WSSFM10R2 Sigfox module. Use it on any development platform. It communicates over UART and it is very easy to use. Simple serial commands to fill the buffer are used. This is a 3.3V system, do not power it with 5V. You can mount this breakout on our Arduino Uno shield to make your development easy.
Do not forget to pick up your antenna kit.For Examples and Design Information visit our Github Repository https://github.com/SeaSlugLabs.
Enjoy 2 free years of Sigfox service with this breakout.
-
WISOL R2D Breakout
This module allows a quick implementation of communications through the Sigfox network, zone 2 and zone 4. It is a breakout that can be easily mounted on a prototype card. It has LEDs to allow to detect its correct functioning.
Made in Mexico.