fbpx

Showing 1–18 of 26 results

  • iSQUARE CALL

    Ordenar productos y servicios es tan fácil como presionar un botón. ISQUARE CALL te permitirá complementar las funcionalidades y servicios que actualmente tienes implementadas en tus clientes finales por medio de un esquema de notificaciones integrado. Es fácil de usar y de ubicar en cualquier ambiente operativo; adicional la integración a las plataformas actuales puede ser realizada de forma rápida y sencilla.

    Proceso de homologación o integración

    1. Activa la conectividad SIGFOX.
    2. Utiliza la trama de datos general.
    3. Parametriza el dispositivo por medio del uso de Downlink Sigfox.
    4. Diseña o complementa tu servicio actual

  • Alert Press

    The button can be used in a fixed place or with a geolocation service activated.
    When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on.

  • Cold Tracker

    Wireless sensor installed in refrigerators for monitoring temperature in a periodical way.

    In addition, it senses the refrigerator’s location.

    It sends notifications via email and SMS.

  • Datalog IOT

    Multi sensor device for remote monitoring system
    Intelligent and easy configurable APP and WEB monitoring applications, plus local sensing devices set for humidity and temperature measuring.
    To expand base sensing capabilities, solicit any desired sensor (such as PT100 RTDs, Thermocouples, CO2 sensors, etc.) to OEM.

    Features
    + Visualization
    + Responsive WEB and APP interface for visualization of:

    • Sensed variable state.
    • Battery level.
    • AC connector.
    • Sigfox signal quality.
    • Graphic record of each variable for up to 2 years.

    + External alarms by SMS, e-mail and Telegram messaging service.

  • Door/Window Sensor

    The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.

    Product brief.

    More about Radio Bridge

  • Dry Contact Sensor

    The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.

    Product Brief

    More about Radio Bridge

  • Duodigit SX

    The DUODIGIT SX is a ready to use, rugged and easy-to-install equipment designed to transmit meter Reading data (water, gas and power) through the LPWA Sigfox network. The equipment can also be used in alarm systems and event occurrences. It has a primary Thionyl Chloride Lithium battery of 6500mA to operate for several years according to the number of daily transmissions.

    APPLICATIONS:

    • Water metering system
    • Gas metering system
    • Power measurement system
    • Alarms
    • Event detector.

    Product developed and produced by Duodigit, a pioneer Brazilian company in the use of SIGFOX technology that has a specialized technical team trained in France.

  • EG-IoT 8AA6 Telemetry

    Products of the EG-IoT range are suitable for rugged external environment . They are all waterproof and shock- resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, provides a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.

    The EG-IoT embedded application allows all geolocation applications like geofencing alert, keep alive information and motion detection. It could be used to monitor a large number of assets and their condition of use (as for one of our customer which rents equipments for public works) or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.

    Thourgh its physical connection, which allows the receipt of sensors information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.

    The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.

  • Electronic Active Seal

    Our security electronic seal makes easier, faster, cheaper and safer, the chance to have a real-time notification over the opening or violation of cargo or any kind of seal, by using an opening alarm generated by the security electronic seal.

    The installation is quite simple and an important difference from other current solutions is that it is not necessary to spend money into inverse logistics because it is designed for one use only.

    Besides the opening notification, the security electronic seal lets the user monitor the container during established periods of time, showing the seal permanency and the active status of the seal. Its autonomy can last 30 days, but this time depends on the design of each project and the regularity of the transmission.

  • GLOKE Asset Tracking

    GLOKE self-sufficient asset tracking device, ideal due to the low installation cost and no maintenance. The device is designed with all automotive standards to last in toughest environments. As standard GLOKE will send 140 messages a day (one message every 11 minutes).

    If the device can’t be exposed to the light, we offer an alternative version, which comes with ability to connect DC input or run on internal battery pack. Battery pack will last, depend on send message frequency up to 10 years.

    There is no GSM tracker which could compete with GLOKE.

    Main device functionality :
    • Self-sufficient device, with additional power supply option
    • Up to 140 messages per day
    • Long lasting battery, depend on send message frequency up to 10 years

    Main platform functionality :
    • API for 3rd party software integration
    • Reporting
    • Geofence function
    • Overall map with location of all customer assets
    • Detailed map per device, ability to
    • Check current location address
    • Check battery status
    • Check temperature status
    • Check history – this gives travel log

    W: www.gloksystems.co.uk
    @: info@gloksystems.co.uk
    T: 01842 646003

  • iButton

    iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.

  • IoTracK

    IoTrack is a module that enables multiple functions and supports different sensors.

  • LOKA AXON

    Expandable Tracking Monitoring Solution.

    The most expandable device of the LOKA Solutions portfolio. It was thought to facilitate the connection with other sensors. It will face demanding situations. It will transmit impulses to the LOKA’s IoT Cloud platform. On top of all it has more battery life.

    Expansion characteristics are: Standard 2.54 header pin Wire terminal Groove connector SDK .

    Auto switch in all RCZ Regions.

    LOKA NEURON Inside.

    LOKA AXON devices are managed in the LOKA MIND IoT Cloud Platform.

  • LOKA PRIMIS

    LOKA’s first low cost / low power tracker, with expansion capabilities.

    Focused on asset tracking, with its geolocations capabilities, LOKA PRIMIS wants to show that assets have reflective thought.

    LOKA PRIMIS devices are managed in the LOKA MIND IoT Cloud Platform.

    This device has an expandable capability that allows one to buy it with an external temperature sensor or GPS.

    It also is possible to adapt to one of two different connectivity networks:
    – Sigfox (Available for RCZ1 | RCZ2 | RCZ4)
    – NB-IoT.

  • Miniac: Service Button

    The one-in-all button. Device + Platform.

    Push the button to trigger customizable notifications to alert self-defined recipients.
    Rich notifications available (SMS, Instant Messaging…)
    Price includes hardware and 1 year of Sigfox connectivity & Miniac (Software).

    Get in touch:
    vtrueba@nxtiot.io
    www.nxtiot.io

    Find it in-store:
    http://www.nxtiot.io/index.php/store/Botones-c30530005

  • MOTO TRACKER

    Wireless sensor installed in motorcycles that transmits their location in a periodical way. Is it possible to activate up to 5 geofences for each sensor. It sends notifications via email and SMS.

  • NANOFOX IOT KIT

    NANOFOX IoT Kit is an evaluation board for Sigfox connectivity using WISOL serial modem. It provides out-of-the-box connection with Arduino NANO / PRO boards, accelerating the learning curve and validation of new ideas, business models, and product concepts.

    Main Features:

    + Connector compatible with Arduino NANO and PRO boards
    + I/Os for external use (i.e.: Shields interface, sensors, etc.)
    + Ease integration with any hardware platform through UART and simple AT commands. (ESP8266, ESP32, Raspberry PI, PIC, AVR, Texas, STM32, PC, etc)
    + Ultra-low power allows battery operation for long periods
    + WISOL Sigfox verified module for region RCZ2 – USA/Mexico/Brazil/Canada
    + 1 year of Sigfox connection included with access to Sigfox Backend tools.

  • PMS-100

    The PMS-100 is a multi-sensor device, designed to be employed by customers and companies wishing to implement an Internet of Things (IoT) radio-based monitoring tool.

    The PMS-100 is a ready-to-use and easy-to-install multi-sensor device, designed to act as a data collector in a wide range of applications. All the data collected can then be used to identify faults and optimize multiple aspects in production lines, by logging a complete history of diverse variables and allowing the user to analyze and draw conclusions from it.

  • 1
  • 2