fbpx

Showing 1–18 of 31 results

  • Alert Press

    The button can be used in a fixed place or with a geolocation service activated.
    When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on.

  • Checkingas

    Smart monitoring system for natural gas. With an non intrusive device which acquires data directly from the mechanic meter and sends it to the cloud, eliminate lecturers and create savings by getting all the data in your hands!

  • Agriculture

    Digitanimal

    Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.

  • Duodigit SX

    The DUODIGIT SX is a ready to use, rugged and easy-to-install equipment designed to transmit meter Reading data (water, gas and power) through the LPWA Sigfox network. The equipment can also be used in alarm systems and event occurrences. It has a primary Thionyl Chloride Lithium battery of 6500mA to operate for several years according to the number of daily transmissions.

    APPLICATIONS:

    • Water metering system
    • Gas metering system
    • Power measurement system
    • Alarms
    • Event detector.

    Product developed and produced by Duodigit, a pioneer Brazilian company in the use of SIGFOX technology that has a specialized technical team trained in France.

  • EFCMPM01

    Energyment®is a proprietary platform do manage consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time and generates usage reports.Energyment® can report your connected devices measures 2 to 96 times a day, everyday, the consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time, and generate monthly usage.

  • Firefly

    Firefly Sigfox is a cutting-edge solution to improve time response to fuse cut out in MV lines in the field.

  • GLOKE Asset Tracking

    GLOKE self-sufficient asset tracking device, ideal due to the low installation cost and no maintenance. The device is designed with all automotive standards to last in toughest environments. As standard GLOKE will send 140 messages a day (one message every 11 minutes).

    If the device can’t be exposed to the light, we offer an alternative version, which comes with ability to connect DC input or run on internal battery pack. Battery pack will last, depend on send message frequency up to 10 years.

    There is no GSM tracker which could compete with GLOKE.

    Main device functionality :
    • Self-sufficient device, with additional power supply option
    • Up to 140 messages per day
    • Long lasting battery, depend on send message frequency up to 10 years

    Main platform functionality :
    • API for 3rd party software integration
    • Reporting
    • Geofence function
    • Overall map with location of all customer assets
    • Detailed map per device, ability to
    • Check current location address
    • Check battery status
    • Check temperature status
    • Check history – this gives travel log

    W: www.gloksystems.co.uk
    @: info@gloksystems.co.uk
    T: 01842 646003

  • HALWATER

    HALWATER – Water Pressure and Level System

    The new generation of water industry solutions designed with best of breed hardware and the power of 4.0 technology.

    Water Industry Smart Devices
    Halwater has designed enhanced measurement devices that can log data, control valves and they can communicate with the most popular SCADA systems. With our cloud platform you can see in real time the data and configure sectors from any computer, smartphone or tablet with a web browser.
    Halwater uses bleeding edge algorithms developed by worldwide recognized engineers in the water industry in order to find inefficiencies and take action in the water network. Plus, we provide AI insights to find tendencies and predict behaviors.

    www.halwater.com
    www.facebook.com/Halwater

  • iButton

    iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.

  • IoTracK

    IoTrack is a module that enables multiple functions and supports different sensors.

  • Iris Hidroconta

    Iris

    IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.

    Sensorization
    IRIS devices allow consumption detection in two possible ways:
    • Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
    • Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.

    Communications
    IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
    In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
    In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.

    Functionality
    Operating profiles based on the requirements for recording historical consumption and communications.
    • Normal-24: Sending data every 24 hours and recording every hour.
    • Normal-8: Sending data every 8 hours and recording every hour.
    • Medium: Data is sent every 12 hours and registration every 30 minutes.
    • Extreme: Sending data every 6 hours and recording every 15 minutes.

    Alarms
    Detection of alarms and their dispatch. Supported alarms:
    Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
    Under-dimensioned meter alarm    : The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
    Leak alarm    : The alarm is activated in the event that continued consumption is detected for a maximum period of time.
    Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
    Counter stopped alarm    : The alarm is activated in the event that no consumption is detected for a maximum period of time.
    Battery status alarms    : Various battery alarm levels are activated depending on the remaining autonomy.

    Communications
    The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.

    From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
    etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.

    Data collection and management
    • Access to a large amount of data recorded by the system
    • Advanced data analysis from consumption graphs.
    • Direct access to information from temporary records.

    Web system
    • Detection and management of alerts for the detection of error situations and their agile solution.
    • Running automatic programs
    • Security and privacy in access to information guaranteed at various levels.

    For more information visit: https://hidroconta.com/

  • iSentinel Cloud

    iSentinel Cloud is a gas tank meter for stationary tank. This solution gives the user the possibility to check the tank gas level from a mobile app.

    The user can also receive a push notification when the tank gas level is low, so he can then purchase more gas. The solution provide total autonomy to measure the gas consumption.

    Features:
    – Gas control from a smartphone
    – Low tank gas level alerts
    – Gas consumption history

    Website:
    https://www.isentinel.com.mx/

  • KRAKEN

    KRAKEN is a precise and complete water quality control system.
    It combines hardware and engineering in a single device capable of detecting variations in the properties of water and it is designed to be implemented in any environment. The impact of KRAKEN reduces costs in water maintenance and increases productivity. Notify the exact water conditions in different places through your mobile app. It is ideal for industrial systems, hydrological plants and any company. Its operation is continuous, and allows you to monitor and make decisions at any time and from any place, reducing costs and working time.

  • Levelgas

    Levelgas is a gas level wireless sensor for propane tanks. With it, you can check your gas level from your smartphone, calculate and follow in real time the refill of your tank, know your consumptions habits and manage your refills according your needs.

  • LOKA INCUS

    LPG Canister & Beer Keg Tracker with filling level measurement.

    The solution for use cases that need to measure level inside a recipient, more specifically kegs and canisters. This device reads the level of filling and allows you to know how full or empty your asset is.

    Auto switch in all RCZ Regions.

    LOKA NEURON Inside.

    LOKA INCUS devices are managed in the LOKA MIND IoT Cloud Platform.

  • LOKA PRIMIS

    LOKA’s first low cost / low power tracker, with expansion capabilities.

    Focused on asset tracking, with its geolocations capabilities, LOKA PRIMIS wants to show that assets have reflective thought.

    LOKA PRIMIS devices are managed in the LOKA MIND IoT Cloud Platform.

    This device has an expandable capability that allows one to buy it with an external temperature sensor or GPS.

    It also is possible to adapt to one of two different connectivity networks:
    – Sigfox (Available for RCZ1 | RCZ2 | RCZ4)
    – NB-IoT.

  • Miniac: Service Button

    The one-in-all button. Device + Platform.

    Push the button to trigger customizable notifications to alert self-defined recipients.
    Rich notifications available (SMS, Instant Messaging…)
    Price includes hardware and 1 year of Sigfox connectivity & Miniac (Software).

    Get in touch:
    vtrueba@nxtiot.io
    www.nxtiot.io

    Find it in-store:
    http://www.nxtiot.io/index.php/store/Botones-c30530005

  • NANOFOX IOT KIT

    NANOFOX IoT Kit is an evaluation board for Sigfox connectivity using WISOL serial modem. It provides out-of-the-box connection with Arduino NANO / PRO boards, accelerating the learning curve and validation of new ideas, business models, and product concepts.

    Main Features:

    + Connector compatible with Arduino NANO and PRO boards
    + I/Os for external use (i.e.: Shields interface, sensors, etc.)
    + Ease integration with any hardware platform through UART and simple AT commands. (ESP8266, ESP32, Raspberry PI, PIC, AVR, Texas, STM32, PC, etc)
    + Ultra-low power allows battery operation for long periods
    + WISOL Sigfox verified module for region RCZ2 – USA/Mexico/Brazil/Canada
    + 1 year of Sigfox connection included with access to Sigfox Backend tools.

  • 1
  • 2