fbpx

Showing 1–18 of 22 results

  • Alert Press

    The button can be used in a fixed place or with a geolocation service activated.
    When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on.

  • Agriculture

    Animal Tracker

    This collar can be used in any kind of animal.

    It is composed by a wireless sensor that transmits their location in a periodical way.

    Can be used with 5 geofences for each sensor.

    It sends notifications via email and SMS.

  • Cold Tracker

    Wireless sensor installed in refrigerators for monitoring temperature in a periodical way.

    In addition, it senses the refrigerator’s location.

    It sends notifications via email and SMS.

  • Datalog IOT

    Multi sensor device for remote monitoring system
    Intelligent and easy configurable APP and WEB monitoring applications, plus local sensing devices set for humidity and temperature measuring.
    To expand base sensing capabilities, solicit any desired sensor (such as PT100 RTDs, Thermocouples, CO2 sensors, etc.) to OEM.

    Features
    + Visualization
    + Responsive WEB and APP interface for visualization of:

    • Sensed variable state.
    • Battery level.
    • AC connector.
    • Sigfox signal quality.
    • Graphic record of each variable for up to 2 years.

    + External alarms by SMS, e-mail and Telegram messaging service.

  • Digital Rain Gauge

    Agrosmart’s digital rain gauge monitors real-time rainfall data and sends it over to the internet. The Agrosmart online app provides rainfall information in real time and distribution through digital maps. By using the system farmers are able to improve decision-making, resulting on higher planting and harvesting efficiency as well as input and labour cost reduction.

    Features:
    – Real time rainfall monitoring
    – Rainfall historical data
    – Distribution maps (available only when the number of digital rain gauges is equal or superior to 4 units)
    – End-to-end solution: installation, maintenance and customer support
    – No need for cell phone or internet signal in the field / SigFox Connection enabled

  • Duodigit SX

    The DUODIGIT SX is a ready to use, rugged and easy-to-install equipment designed to transmit meter Reading data (water, gas and power) through the LPWA Sigfox network. The equipment can also be used in alarm systems and event occurrences. It has a primary Thionyl Chloride Lithium battery of 6500mA to operate for several years according to the number of daily transmissions.

    APPLICATIONS:

    • Water metering system
    • Gas metering system
    • Power measurement system
    • Alarms
    • Event detector.

    Product developed and produced by Duodigit, a pioneer Brazilian company in the use of SIGFOX technology that has a specialized technical team trained in France.

  • EFCMPM01

    Energyment®is a proprietary platform do manage consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time and generates usage reports.Energyment® can report your connected devices measures 2 to 96 times a day, everyday, the consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time, and generate monthly usage.

  • Electronic Active Seal

    Our security electronic seal makes easier, faster, cheaper and safer, the chance to have a real-time notification over the opening or violation of cargo or any kind of seal, by using an opening alarm generated by the security electronic seal.

    The installation is quite simple and an important difference from other current solutions is that it is not necessary to spend money into inverse logistics because it is designed for one use only.

    Besides the opening notification, the security electronic seal lets the user monitor the container during established periods of time, showing the seal permanency and the active status of the seal. Its autonomy can last 30 days, but this time depends on the design of each project and the regularity of the transmission.

  • Embedded Devkit (EDK)

    High-powered development kit that can be used as a POC platform to develop and try out your solution, or as a maker’s ground for experimenting.

     

  • Firefly

    Firefly Sigfox is a cutting-edge solution to improve time response to fuse cut out in MV lines in the field.

  • Getrak FOX

    Getrak FOX is a small device with a battery designed to track vehicles, people, pets, loads and utilities. It is easy to install and its battery can last up to 2 years. The device works with Getrak tracking platform and a Deep Track machine learning platform where you can track the device, generate reports and manage the alerts.

  • iButton

    iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.

  • ILIGHT

    ILIGHT

    iLIGHT is a device for the proper management of streetlights. The equipment can work autonomously, it switches on or off according to the level of light in the environment, it can also work in a controlled manner, in which the equipment is instructed to turn on or off the lights and for how long.

  • MOTO TRACKER

    Wireless sensor installed in motorcycles that transmits their location in a periodical way. Is it possible to activate up to 5 geofences for each sensor. It sends notifications via email and SMS.

  • NANOFOX IOT KIT

    NANOFOX IoT Kit is an evaluation board for Sigfox connectivity using WISOL serial modem. It provides out-of-the-box connection with Arduino NANO / PRO boards, accelerating the learning curve and validation of new ideas, business models, and product concepts.

    Main Features:

    + Connector compatible with Arduino NANO and PRO boards
    + I/Os for external use (i.e.: Shields interface, sensors, etc.)
    + Ease integration with any hardware platform through UART and simple AT commands. (ESP8266, ESP32, Raspberry PI, PIC, AVR, Texas, STM32, PC, etc)
    + Ultra-low power allows battery operation for long periods
    + WISOL Sigfox verified module for region RCZ2 – USA/Mexico/Brazil/Canada
    + 1 year of Sigfox connection included with access to Sigfox Backend tools.

  • PMS-100

    The PMS-100 is a multi-sensor device, designed to be employed by customers and companies wishing to implement an Internet of Things (IoT) radio-based monitoring tool.

    The PMS-100 is a ready-to-use and easy-to-install multi-sensor device, designed to act as a data collector in a wide range of applications. All the data collected can then be used to identify faults and optimize multiple aspects in production lines, by logging a complete history of diverse variables and allowing the user to analyze and draw conclusions from it.

  • RS2000 SMART SF

    This backpack enables a remote operation for reading, connecting & disconnecting and reducing losses for low voltage customers.:

    • Monitoring & sensing functionalities, reducing efforts in losses control and diagnosis.
    • Field Environment Protection: Intrusive phase sensing. Quality of services to the utility in the benefit of the final customer protection. Notifies the utility in case of voltage in disconnected clients.
    • Data Access: Independence, flexibility & convenience in metering data availability. Data are obtained by scheduling and also on demand, including mass memory registered by the SF-Smart – Backpack.

  • SigPark

    SigPark is a LPWA device operating with Sigfox network, which basically detects parking slot status, by the detection of metallic mass with the use of magnetic sensor. It has an internal battery that can last up to 5 years.

  • 1
  • 2