Showing 1–18 of 45 results
-
Checkingas
Smart monitoring system for natural gas. With an non intrusive device which acquires data directly from the mechanic meter and sends it to the cloud, eliminate lecturers and create savings by getting all the data in your hands!
-
Devkit V2.0
Get Sigfox-on board with this all-features Development Kit. Connect more than 8 sensors and empower your IoT curiosity & skills, even if you are not a hardware-genius. Exclusively designed for tech startups, tech lovers, design houses, schools & universities, and anybody who wants to jump in IoT and make their ideas a prototype in less than an hour.
Programm it in IDE Arduino. The IoT made easier than easy.
-
Digital Rain Gauge
Agrosmart’s digital rain gauge monitors real-time rainfall data and sends it over to the internet. The Agrosmart online app provides rainfall information in real time and distribution through digital maps. By using the system farmers are able to improve decision-making, resulting on higher planting and harvesting efficiency as well as input and labour cost reduction.
Features:
– Real time rainfall monitoring
– Rainfall historical data
– Distribution maps (available only when the number of digital rain gauges is equal or superior to 4 units)
– End-to-end solution: installation, maintenance and customer support
– No need for cell phone or internet signal in the field / SigFox Connection enabled -
Digitanimal
Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.
-
Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.
-
Dry Contact Sensor
The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.
-
Duodigit SX
The DUODIGIT SX is a ready to use, rugged and easy-to-install equipment designed to transmit meter Reading data (water, gas and power) through the LPWA Sigfox network. The equipment can also be used in alarm systems and event occurrences. It has a primary Thionyl Chloride Lithium battery of 6500mA to operate for several years according to the number of daily transmissions.
APPLICATIONS:
- Water metering system
- Gas metering system
- Power measurement system
- Alarms
- Event detector.
Product developed and produced by Duodigit, a pioneer Brazilian company in the use of SIGFOX technology that has a specialized technical team trained in France.
-
EFCMPM01
Energyment®is a proprietary platform do manage consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time and generates usage reports.Energyment® can report your connected devices measures 2 to 96 times a day, everyday, the consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time, and generate monthly usage.
-
Embedded Devkit (EDK)
High-powered development kit that can be used as a POC platform to develop and try out your solution, or as a maker’s ground for experimenting.
-
Firefly
Firefly Sigfox is a cutting-edge solution to improve time response to fuse cut out in MV lines in the field.
-
Getrak FOX
Getrak FOX is a small device with a battery designed to track vehicles, people, pets, loads and utilities. It is easy to install and its battery can last up to 2 years. The device works with Getrak tracking platform and a Deep Track machine learning platform where you can track the device, generate reports and manage the alerts.
-
GOBLIN 2 Plus Sigfox
Embrace the possibilities of the IoT.
Lower energy consumption due to simplified network communications. Affordable data plan prices that can go as low as 5 USD a year, transmitting up to 140 messages a day. -
GOLEM
GOLEM is a high tech device designed to monitor and optimize soil quality in a variety of environments.
This system is ideal to automatize the complete solution, by having sensors taking sample readings in real-time, it is possible to detect when one of the parameters is not in an ideal condition, hence making it easier to take action to solve it. For example, if soil moisture is dropping, GOLEM can be programmed to send a command to activate water pumps to moisturize the field. -
HALWATER
HALWATER – Water Pressure and Level System
The new generation of water industry solutions designed with best of breed hardware and the power of 4.0 technology.
Water Industry Smart Devices
Halwater has designed enhanced measurement devices that can log data, control valves and they can communicate with the most popular SCADA systems. With our cloud platform you can see in real time the data and configure sectors from any computer, smartphone or tablet with a web browser.
Halwater uses bleeding edge algorithms developed by worldwide recognized engineers in the water industry in order to find inefficiencies and take action in the water network. Plus, we provide AI insights to find tendencies and predict behaviors. -
-
Iris
IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.
Sensorization
IRIS devices allow consumption detection in two possible ways:
• Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
• Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.Communications
IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.Functionality
Operating profiles based on the requirements for recording historical consumption and communications.
• Normal-24: Sending data every 24 hours and recording every hour.
• Normal-8: Sending data every 8 hours and recording every hour.
• Medium: Data is sent every 12 hours and registration every 30 minutes.
• Extreme: Sending data every 6 hours and recording every 15 minutes.Alarms
Detection of alarms and their dispatch. Supported alarms:
Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
Under-dimensioned meter alarm: The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
Leak alarm: The alarm is activated in the event that continued consumption is detected for a maximum period of time.
Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
Counter stopped alarm: The alarm is activated in the event that no consumption is detected for a maximum period of time.
Battery status alarms: Various battery alarm levels are activated depending on the remaining autonomy.Communications
The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.Data collection and management
• Access to a large amount of data recorded by the system
• Advanced data analysis from consumption graphs.
• Direct access to information from temporary records.Web system
• Detection and management of alerts for the detection of error situations and their agile solution.
• Running automatic programs
• Security and privacy in access to information guaranteed at various levels.For more information visit: https://hidroconta.com/
-
iSentinel Cloud
iSentinel Cloud is a gas tank meter for stationary tank. This solution gives the user the possibility to check the tank gas level from a mobile app.
The user can also receive a push notification when the tank gas level is low, so he can then purchase more gas. The solution provide total autonomy to measure the gas consumption.
Features:
– Gas control from a smartphone
– Low tank gas level alerts
– Gas consumption historyWebsite:
https://www.isentinel.com.mx/ -
KRAKEN
KRAKEN is a precise and complete water quality control system.
It combines hardware and engineering in a single device capable of detecting variations in the properties of water and it is designed to be implemented in any environment. The impact of KRAKEN reduces costs in water maintenance and increases productivity. Notify the exact water conditions in different places through your mobile app. It is ideal for industrial systems, hydrological plants and any company. Its operation is continuous, and allows you to monitor and make decisions at any time and from any place, reducing costs and working time.