fbpx

Showing 1–18 of 44 results

  • Acceleration-Based Movement Sensor

    The acceleration-based movement sensor uses an internal accelerometer to detect movement of an asset. When motion is detected that exceeds a certain threshold, an alert is sent over the wireless network.

    Product Brief

    More about Radio Bridge

  • Air Temperature and Humidity Sensor

    By Radio Bridge.

    The air temperature and humidity sensor uses air flow to measure temperature and humidity levels. If the temperature and/or humidity rises above or falls below the configured thresholds, an alert is sent over the wireless network.

    Product Brief

    More about Radio Bridge

  • Checkingas

    Smart monitoring system for natural gas. With an non intrusive device which acquires data directly from the mechanic meter and sends it to the cloud, eliminate lecturers and create savings by getting all the data in your hands!

  • Devkit V2.0

    Get Sigfox-on board with this all-features Development Kit. Connect more than 8 sensors and empower your IoT curiosity & skills, even if you are not a hardware-genius. Exclusively designed for tech startups, tech lovers, design houses, schools & universities, and anybody who wants to jump in IoT and make their ideas a prototype in less than an hour.

    Programm it in IDE Arduino. The IoT made easier than easy.

  • Agriculture

    Digitanimal

    Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.

  • Door/Window Sensor

    The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.

    Product brief.

    More about Radio Bridge

  • Dry Contact Sensor

    The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.

    Product Brief

    More about Radio Bridge

  • External Probe Temperature Sensor

    The external probe temperature sensor measures temperature using an external temperature probe. If the temperature rises above or falls below the configured thresholds, an alert is sent over the wireless network.

    Product Brief

    More about Radio Bridge

  • GOBLIN 2 Plus Sigfox

    Embrace the possibilities of the IoT.
    Lower energy consumption due to simplified network communications. Affordable data plan prices that can go as low as 5 USD a year, transmitting up to 140 messages a day.

  • GOLEM

    GOLEM is a high tech device designed to monitor and optimize soil quality in a variety of environments.
    This system is ideal to automatize the complete solution, by having sensors taking sample readings in real-time, it is possible to detect when one of the parameters is not in an ideal condition, hence making it easier to take action to solve it. For example, if soil moisture is dropping, GOLEM can be programmed to send a command to activate water pumps to moisturize the field.

  • GPS Antijammer IOTR-AJ-001

    Designed to detect and act in the presence of a cell phone blocker. Upon detection of a cellphone blocker, a safety protocol will be activated to ensure that the vehicle or transport is recovered.

    When it detects a jammer, it will continue to send location information since its
    technology allows it to be visible even with Jammer present.

    This device will send critical information about the
    status and gps position so that in a time not exceeding 20 minutes the unit can be located safely.

    The price includes 1 year of service and connectivity, tracking platform.

    Self-management Tracking Platform
    Easy to access
    Easy installation
    1 year warranty against manufacturing defects

    – Alerts for Jammer’s presence
    – Historic up to 90 days
    – Programmable reports
    – Email alerts, on screen / SMS.

  • HALWATER

    HALWATER – Water Pressure and Level System

    The new generation of water industry solutions designed with best of breed hardware and the power of 4.0 technology.

    Water Industry Smart Devices
    Halwater has designed enhanced measurement devices that can log data, control valves and they can communicate with the most popular SCADA systems. With our cloud platform you can see in real time the data and configure sectors from any computer, smartphone or tablet with a web browser.
    Halwater uses bleeding edge algorithms developed by worldwide recognized engineers in the water industry in order to find inefficiencies and take action in the water network. Plus, we provide AI insights to find tendencies and predict behaviors.

    www.halwater.com
    www.facebook.com/Halwater

  • IoTracK

    IoTrack is a module that enables multiple functions and supports different sensors.

  • Iris Hidroconta

    Iris

    IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.

    Sensorization
    IRIS devices allow consumption detection in two possible ways:
    • Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
    • Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.

    Communications
    IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
    In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
    In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.

    Functionality
    Operating profiles based on the requirements for recording historical consumption and communications.
    • Normal-24: Sending data every 24 hours and recording every hour.
    • Normal-8: Sending data every 8 hours and recording every hour.
    • Medium: Data is sent every 12 hours and registration every 30 minutes.
    • Extreme: Sending data every 6 hours and recording every 15 minutes.

    Alarms
    Detection of alarms and their dispatch. Supported alarms:
    Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
    Under-dimensioned meter alarm    : The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
    Leak alarm    : The alarm is activated in the event that continued consumption is detected for a maximum period of time.
    Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
    Counter stopped alarm    : The alarm is activated in the event that no consumption is detected for a maximum period of time.
    Battery status alarms    : Various battery alarm levels are activated depending on the remaining autonomy.

    Communications
    The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.

    From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
    etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.

    Data collection and management
    • Access to a large amount of data recorded by the system
    • Advanced data analysis from consumption graphs.
    • Direct access to information from temporary records.

    Web system
    • Detection and management of alerts for the detection of error situations and their agile solution.
    • Running automatic programs
    • Security and privacy in access to information guaranteed at various levels.

    For more information visit: https://hidroconta.com/

  • iSentinel Cloud

    iSentinel Cloud is a gas tank meter for stationary tank. This solution gives the user the possibility to check the tank gas level from a mobile app.

    The user can also receive a push notification when the tank gas level is low, so he can then purchase more gas. The solution provide total autonomy to measure the gas consumption.

    Features:
    – Gas control from a smartphone
    – Low tank gas level alerts
    – Gas consumption history

    Website:
    https://www.isentinel.com.mx/

  • KRAKEN

    KRAKEN is a precise and complete water quality control system.
    It combines hardware and engineering in a single device capable of detecting variations in the properties of water and it is designed to be implemented in any environment. The impact of KRAKEN reduces costs in water maintenance and increases productivity. Notify the exact water conditions in different places through your mobile app. It is ideal for industrial systems, hydrological plants and any company. Its operation is continuous, and allows you to monitor and make decisions at any time and from any place, reducing costs and working time.

  • Levelgas

    Levelgas is a gas level wireless sensor for propane tanks. With it, you can check your gas level from your smartphone, calculate and follow in real time the refill of your tank, know your consumptions habits and manage your refills according your needs.

  • Logipark

    Logipark works as a IoT-powered Yard management system for the tracking and monitoring of the logistic process.
    It allows organizations to gather information on their IoT devices to make better decisions and have a broader business insight, empowering businesses to optimize their resources, reduce risks, and leverage real-time information.

    https://www.nxtiot.io/