fbpx

Showing 19–36 of 57 results

  • iButton

    iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.

  • IoTracK

    IoTrack is a module that enables multiple functions and supports different sensors.

  • Iris Hidroconta

    Iris

    IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.

    Sensorization
    IRIS devices allow consumption detection in two possible ways:
    • Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
    • Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.

    Communications
    IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
    In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
    In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.

    Functionality
    Operating profiles based on the requirements for recording historical consumption and communications.
    • Normal-24: Sending data every 24 hours and recording every hour.
    • Normal-8: Sending data every 8 hours and recording every hour.
    • Medium: Data is sent every 12 hours and registration every 30 minutes.
    • Extreme: Sending data every 6 hours and recording every 15 minutes.

    Alarms
    Detection of alarms and their dispatch. Supported alarms:
    Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
    Under-dimensioned meter alarm    : The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
    Leak alarm    : The alarm is activated in the event that continued consumption is detected for a maximum period of time.
    Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
    Counter stopped alarm    : The alarm is activated in the event that no consumption is detected for a maximum period of time.
    Battery status alarms    : Various battery alarm levels are activated depending on the remaining autonomy.

    Communications
    The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.

    From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
    etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.

    Data collection and management
    • Access to a large amount of data recorded by the system
    • Advanced data analysis from consumption graphs.
    • Direct access to information from temporary records.

    Web system
    • Detection and management of alerts for the detection of error situations and their agile solution.
    • Running automatic programs
    • Security and privacy in access to information guaranteed at various levels.

    For more information visit: https://hidroconta.com/

  • iSentinel Cloud

    iSentinel Cloud is a gas tank meter for stationary tank. This solution gives the user the possibility to check the tank gas level from a mobile app.

    The user can also receive a push notification when the tank gas level is low, so he can then purchase more gas. The solution provide total autonomy to measure the gas consumption.

    Features:
    – Gas control from a smartphone
    – Low tank gas level alerts
    – Gas consumption history

    Website:
    https://www.isentinel.com.mx/

  • KRAKEN

    KRAKEN is a precise and complete water quality control system.
    It combines hardware and engineering in a single device capable of detecting variations in the properties of water and it is designed to be implemented in any environment. The impact of KRAKEN reduces costs in water maintenance and increases productivity. Notify the exact water conditions in different places through your mobile app. It is ideal for industrial systems, hydrological plants and any company. Its operation is continuous, and allows you to monitor and make decisions at any time and from any place, reducing costs and working time.

  • Levelgas

    Levelgas is a gas level wireless sensor for propane tanks. With it, you can check your gas level from your smartphone, calculate and follow in real time the refill of your tank, know your consumptions habits and manage your refills according your needs.

  • LOKA AXON

    Expandable Tracking Monitoring Solution.

    The most expandable device of the LOKA Solutions portfolio. It was thought to facilitate the connection with other sensors. It will face demanding situations. It will transmit impulses to the LOKA’s IoT Cloud platform. On top of all it has more battery life.

    Expansion characteristics are: Standard 2.54 header pin Wire terminal Groove connector SDK .

    Auto switch in all RCZ Regions.

    LOKA NEURON Inside.

    LOKA AXON devices are managed in the LOKA MIND IoT Cloud Platform.

  • LOKA INCUS

    LPG Canister & Beer Keg Tracker with filling level measurement.

    The solution for use cases that need to measure level inside a recipient, more specifically kegs and canisters. This device reads the level of filling and allows you to know how full or empty your asset is.

    Auto switch in all RCZ Regions.

    LOKA NEURON Inside.

    LOKA INCUS devices are managed in the LOKA MIND IoT Cloud Platform.

  • LOKA MIND

    The LOKA Mind is a cloud platform with advanced management functionality.

    Key features:

    •Dynamic notifications on sensors readings

    •Group and individual device operations

    •Over the air Firmware update

    •APIs for 3rd party applications

    •Support of 3rd party devices

    What do you want to monitor?

    – Tracking

    – Temperature

    – Movement

    – Geofencing

    – Battery

    You are in control of your device’s configuration through the LOKA MIND.

    Set alerts for tracking in real-time or define the historical information you want.

    Create your user and entities for each device.

  • LOKA NEURON

    Full stack module hardware > firmware > cloud solution.

    This module is the base of all devices produced by LOKA’s team. It has temperature, movement and geolocation sensors with low power consumption. It differs from other modules in the market because it is ready to connect all existent sensors and nonexistent sensors directly to the IoT Cloud platform, allowing information about all sensors to flow easily. Its newness is also associated to its energy supply sensors and the size in which all of this fits in.

    Features :
    Power: 2.4 to 5.5 V | Ports: Analog Input / Output, Digital Input / Output, SPI, UART | Geolocation algoritm for Wifi, BLE, GPS | Rules Engine for sensor monitoring, logging and data offload Auto switch in all RCZ Regions

  • LOKA ORBIS

    Industrial low power, low cost tracker.

    Built to be a the most standard low cost asset tracker. The goal is to have a product that can adapt to biggest number of our clients’ solutions. Gives assets the capability to see, feel, hear its surroundings. With geofencing capabilities indoor and outdoor.

    Auto switch in all RCZ Regions.

    LOKA NEURON Inside.

    LOKA ORBIS devices are managed in the LOKA MIND IoT Cloud Platform.

  • LOKA PRIMIS

    LOKA’s first low cost / low power tracker, with expansion capabilities.

    Focused on asset tracking, with its geolocations capabilities, LOKA PRIMIS wants to show that assets have reflective thought.

    LOKA PRIMIS devices are managed in the LOKA MIND IoT Cloud Platform.

    This device has an expandable capability that allows one to buy it with an external temperature sensor or GPS.

    It also is possible to adapt to one of two different connectivity networks:
    – Sigfox (Available for RCZ1 | RCZ2 | RCZ4)
    – NB-IoT.

  • Agriculture, Environment, Utilities

    MeteoHelix® IoT weather station

    We shrunk a professional solar powered meteorological weather station costing 2950 EUR into a compact micro-weather station costing 1/6th the price using new IoT wireless technologies and sensors. Featuring a patented helical design, MeteoHelix® is the only micro-weather station able to meet quality standards for climatic observations in all weather conditions as set by the World Meteorological Organization (WMO). Measures temperature, humidity, pressure, sun intensity (irradiation), rain. MeteoWind sensor coming soon.

    allMETEO Web portal is free with the purchase of a MeteoHelix® personal weather station by BARANI DESIGN Technologies.

  • Miniac – Asset management

    Miniac works as a IoT-powered asset management platform for the tracing and monitoring of different kinds of assets.
    It allows organizations to gather information on their IoT devices to make better decisions and have a broader business insight, empowering businesses to optimize their resources, reduce risks, and leverage real-time information for increased decision making.

    https://www.nxtiot.io/

  • Miniac: Service Button

    The one-in-all button. Device + Platform.

    Push the button to trigger customizable notifications to alert self-defined recipients.
    Rich notifications available (SMS, Instant Messaging…)
    Price includes hardware and 1 year of Sigfox connectivity & Miniac (Software).

    Get in touch:
    vtrueba@nxtiot.io
    www.nxtiot.io

    Find it in-store:
    http://www.nxtiot.io/index.php/store/Botones-c30530005

  • MOTO TRACKER

    Wireless sensor installed in motorcycles that transmits their location in a periodical way. Is it possible to activate up to 5 geofences for each sensor. It sends notifications via email and SMS.

  • MS1001S-RCZ2 / RCZ4

    Electric Power Meter for 240V/100A service. To IEC Class 1 but calibrated at under 0.5%. Sigfox Downlink control of Uplink Interval and Relay status. Uplink data includes Active Energy (kWh), Current (Arms), Voltage (Vrms), Active Power (kW), Reactive Power (kVAR), Power Factor. 10 Uplink intervals selectable from every 12 minutes to once every 24 hours.
    With optional dashboard display for the Data needed.

  • NANOFOX IOT KIT

    NANOFOX IoT Kit is an evaluation board for Sigfox connectivity using WISOL serial modem. It provides out-of-the-box connection with Arduino NANO / PRO boards, accelerating the learning curve and validation of new ideas, business models, and product concepts.

    Main Features:

    + Connector compatible with Arduino NANO and PRO boards
    + I/Os for external use (i.e.: Shields interface, sensors, etc.)
    + Ease integration with any hardware platform through UART and simple AT commands. (ESP8266, ESP32, Raspberry PI, PIC, AVR, Texas, STM32, PC, etc)
    + Ultra-low power allows battery operation for long periods
    + WISOL Sigfox verified module for region RCZ2 – USA/Mexico/Brazil/Canada
    + 1 year of Sigfox connection included with access to Sigfox Backend tools.