Showing 1–18 of 21 results
-
Alert Press
The button can be used in a fixed place or with a geolocation service activated.
When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on. -
Cold Tracker
Wireless sensor installed in refrigerators for monitoring temperature in a periodical way.
In addition, it senses the refrigerator’s location.
It sends notifications via email and SMS.
-
Datalog IOT
Multi sensor device for remote monitoring system
Intelligent and easy configurable APP and WEB monitoring applications, plus local sensing devices set for humidity and temperature measuring.
To expand base sensing capabilities, solicit any desired sensor (such as PT100 RTDs, Thermocouples, CO2 sensors, etc.) to OEM.Features
+ Visualization
+ Responsive WEB and APP interface for visualization of:- Sensed variable state.
- Battery level.
- AC connector.
- Sigfox signal quality.
- Graphic record of each variable for up to 2 years.
+ External alarms by SMS, e-mail and Telegram messaging service.
-
Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.
-
Dry Contact Sensor
The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.
-
Electronic Active Seal
Our security electronic seal makes easier, faster, cheaper and safer, the chance to have a real-time notification over the opening or violation of cargo or any kind of seal, by using an opening alarm generated by the security electronic seal.
The installation is quite simple and an important difference from other current solutions is that it is not necessary to spend money into inverse logistics because it is designed for one use only.
Besides the opening notification, the security electronic seal lets the user monitor the container during established periods of time, showing the seal permanency and the active status of the seal. Its autonomy can last 30 days, but this time depends on the design of each project and the regularity of the transmission.
-
iButton
iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.
-
Levelgas
Levelgas is a gas level wireless sensor for propane tanks. With it, you can check your gas level from your smartphone, calculate and follow in real time the refill of your tank, know your consumptions habits and manage your refills according your needs.
-
MeteoHelix® IoT weather station
We shrunk a professional solar powered meteorological weather station costing 2950 EUR into a compact micro-weather station costing 1/6th the price using new IoT wireless technologies and sensors. Featuring a patented helical design, MeteoHelix® is the only micro-weather station able to meet quality standards for climatic observations in all weather conditions as set by the World Meteorological Organization (WMO). Measures temperature, humidity, pressure, sun intensity (irradiation), rain. MeteoWind sensor coming soon.
allMETEO Web portal is free with the purchase of a MeteoHelix® personal weather station by BARANI DESIGN Technologies.
-
Miniac: Service Button
The one-in-all button. Device + Platform.
Push the button to trigger customizable notifications to alert self-defined recipients.
Rich notifications available (SMS, Instant Messaging…)
Price includes hardware and 1 year of Sigfox connectivity & Miniac (Software).Get in touch:
vtrueba@nxtiot.io
www.nxtiot.ioFind it in-store:
http://www.nxtiot.io/index.php/store/Botones-c30530005 -
MOTO TRACKER
Wireless sensor installed in motorcycles that transmits their location in a periodical way. Is it possible to activate up to 5 geofences for each sensor. It sends notifications via email and SMS.
-
PMS-100
The PMS-100 is a multi-sensor device, designed to be employed by customers and companies wishing to implement an Internet of Things (IoT) radio-based monitoring tool.
The PMS-100 is a ready-to-use and easy-to-install multi-sensor device, designed to act as a data collector in a wide range of applications. All the data collected can then be used to identify faults and optimize multiple aspects in production lines, by logging a complete history of diverse variables and allowing the user to analyze and draw conclusions from it.
-
SigPark
SigPark is a LPWA device operating with Sigfox network, which basically detects parking slot status, by the detection of metallic mass with the use of magnetic sensor. It has an internal battery that can last up to 5 years.
-
SigSense
SigSense is a LPWA device operating in Sigfox network, with the main purpose of monitoring operating time of machines by the detection of vibrations, to be used both indoor and outdoor. It has an internal battery that can last up to 5 years.
-
Simple Leak – Water Leak Detector
Reliable, no false alarms
Solid gold-plated contacts
Cool, small, clever design
Waterproof IP67 and sending while floating
Lasting over 10 years
Loud alarm buzzer
Movement or flip warning (accelerometer inside)
End of leak detection and reportingSize: 60x60x60mm
Sigfox power radiation Class 0
Documented payloads and remote configuration
Firmware upgrade available (no disassembly needed)
UV print branding and paper packaging available at extra charge – contact us with your inquiry
Full featured demo platform iofrog.com available and support of tens of other IoT platforms
Temperature threshold alarms (antifreeze, overheat)
Incredible radio performance -
SimplePack 3.0 Plus WiFi tracker
SimplePack 3.0 Plus WiFi tracker is a multi-sensor Sigfox IoT device that can be used to track, trace and guard your assets.
Usage scenario: Well known routes and timings, not critically sensitive to work and to switch to proper time zone with border crossingThe additional Wi-Fi sniffing allows for more precise localization of the device, which is very helpful in warehouses and in every situation that requires knowing the exact position.
Sensors:
Accelerometer
Clicking button with haptic feedback
Ambi temperature
WiFi – for localization through MAC address sniffingDevice specifications:
Small form-factor – size: 81 x 29 x 12mm
Non-rechargeable, non-replaceable long-lasting battery – 30 000 messages (typical battery life in active Guard me WiFi 10 years)
Open and documented API (can be found right here)
Nice, small, waterproof case
Official IP68 water and dust resistance rating
UV print branding and paper packaging available at an extra charge – contact us with your inquiryIoT platform:
The most advanced Sigfox platform IOFrog.com available for your use (3 months free trial)
Support of tens of other IoT platforms, multi-language support, all devices in one place
Map view – Custom markers based on device status, tracing the history, the difference between the home position and current position
Notifications – SMS and E-mail notifications set on device level
Android & iOS mobile apps -
SimplePack Plus 3.0 Full
A universal device that integrators can build their IoT solutions upon
The smallest and cheapest Sigfox device, lasting 10 years on a battery.– Small form-factor – size: 81 x 29 x 12mm
– Non-rechargeable, non-replaceable long-lasting battery – 30 000 messages (typical lifetime in guard mode – 10 years)
– Nice, small, waterproof case (IP68 rating)
– UV print branding and paper packaging available at an extra charge – contact us with your inquiry -
Smart photocontrol
Lighting on and off unit based on sunlight in the environment, with monitoring of electrical parameters and remote programming of delays on and off before or after sunrise and sunset. It has the ability to control intensity dimming with programmable times in luminaires prepared with 0 10 volt input with 7-way standard socket base. Auxiliary device for service departments and lighting maintenance.
- 1
- 2