Showing 1–18 of 26 results
-
Alert Press
The button can be used in a fixed place or with a geolocation service activated.
When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on. -
Animal Tracker
This collar can be used in any kind of animal.
It is composed by a wireless sensor that transmits their location in a periodical way.
Can be used with 5 geofences for each sensor.
It sends notifications via email and SMS.
-
Cold Tracker
Wireless sensor installed in refrigerators for monitoring temperature in a periodical way.
In addition, it senses the refrigerator’s location.
It sends notifications via email and SMS.
-
Digitanimal
Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.
-
Duodigit SX
The DUODIGIT SX is a ready to use, rugged and easy-to-install equipment designed to transmit meter Reading data (water, gas and power) through the LPWA Sigfox network. The equipment can also be used in alarm systems and event occurrences. It has a primary Thionyl Chloride Lithium battery of 6500mA to operate for several years according to the number of daily transmissions.
APPLICATIONS:
- Water metering system
- Gas metering system
- Power measurement system
- Alarms
- Event detector.
Product developed and produced by Duodigit, a pioneer Brazilian company in the use of SIGFOX technology that has a specialized technical team trained in France.
-
EFCMPM01
Energyment®is a proprietary platform do manage consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time and generates usage reports.Energyment® can report your connected devices measures 2 to 96 times a day, everyday, the consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time, and generate monthly usage.
-
Firefly
Firefly Sigfox is a cutting-edge solution to improve time response to fuse cut out in MV lines in the field.
-
Getrak FOX
Getrak FOX is a small device with a battery designed to track vehicles, people, pets, loads and utilities. It is easy to install and its battery can last up to 2 years. The device works with Getrak tracking platform and a Deep Track machine learning platform where you can track the device, generate reports and manage the alerts.
-
GLOKE Asset Tracking
GLOKE self-sufficient asset tracking device, ideal due to the low installation cost and no maintenance. The device is designed with all automotive standards to last in toughest environments. As standard GLOKE will send 140 messages a day (one message every 11 minutes).
If the device can’t be exposed to the light, we offer an alternative version, which comes with ability to connect DC input or run on internal battery pack. Battery pack will last, depend on send message frequency up to 10 years.
There is no GSM tracker which could compete with GLOKE.
Main device functionality :
• Self-sufficient device, with additional power supply option
• Up to 140 messages per day
• Long lasting battery, depend on send message frequency up to 10 yearsMain platform functionality :
• API for 3rd party software integration
• Reporting
• Geofence function
• Overall map with location of all customer assets
• Detailed map per device, ability to
• Check current location address
• Check battery status
• Check temperature status
• Check history – this gives travel logW: www.gloksystems.co.uk
@: info@gloksystems.co.uk
T: 01842 646003 -
iButton
iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.
-
Iris
IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.
Sensorization
IRIS devices allow consumption detection in two possible ways:
• Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
• Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.Communications
IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.Functionality
Operating profiles based on the requirements for recording historical consumption and communications.
• Normal-24: Sending data every 24 hours and recording every hour.
• Normal-8: Sending data every 8 hours and recording every hour.
• Medium: Data is sent every 12 hours and registration every 30 minutes.
• Extreme: Sending data every 6 hours and recording every 15 minutes.Alarms
Detection of alarms and their dispatch. Supported alarms:
Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
Under-dimensioned meter alarm: The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
Leak alarm: The alarm is activated in the event that continued consumption is detected for a maximum period of time.
Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
Counter stopped alarm: The alarm is activated in the event that no consumption is detected for a maximum period of time.
Battery status alarms: Various battery alarm levels are activated depending on the remaining autonomy.Communications
The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.Data collection and management
• Access to a large amount of data recorded by the system
• Advanced data analysis from consumption graphs.
• Direct access to information from temporary records.Web system
• Detection and management of alerts for the detection of error situations and their agile solution.
• Running automatic programs
• Security and privacy in access to information guaranteed at various levels.For more information visit: https://hidroconta.com/
-
LOKA AXON
Expandable Tracking Monitoring Solution.
The most expandable device of the LOKA Solutions portfolio. It was thought to facilitate the connection with other sensors. It will face demanding situations. It will transmit impulses to the LOKA’s IoT Cloud platform. On top of all it has more battery life.
Expansion characteristics are: Standard 2.54 header pin Wire terminal Groove connector SDK .
Auto switch in all RCZ Regions.
LOKA NEURON Inside.
LOKA AXON devices are managed in the LOKA MIND IoT Cloud Platform.
-
LOKA INCUS
LPG Canister & Beer Keg Tracker with filling level measurement.
The solution for use cases that need to measure level inside a recipient, more specifically kegs and canisters. This device reads the level of filling and allows you to know how full or empty your asset is.
Auto switch in all RCZ Regions.
LOKA NEURON Inside.
LOKA INCUS devices are managed in the LOKA MIND IoT Cloud Platform.
-
LOKA ORBIS
Industrial low power, low cost tracker.
Built to be a the most standard low cost asset tracker. The goal is to have a product that can adapt to biggest number of our clients’ solutions. Gives assets the capability to see, feel, hear its surroundings. With geofencing capabilities indoor and outdoor.
Auto switch in all RCZ Regions.
LOKA NEURON Inside.
LOKA ORBIS devices are managed in the LOKA MIND IoT Cloud Platform.
-
LOKA PRIMIS
LOKA’s first low cost / low power tracker, with expansion capabilities.
Focused on asset tracking, with its geolocations capabilities, LOKA PRIMIS wants to show that assets have reflective thought.
LOKA PRIMIS devices are managed in the LOKA MIND IoT Cloud Platform.
This device has an expandable capability that allows one to buy it with an external temperature sensor or GPS.
It also is possible to adapt to one of two different connectivity networks:
– Sigfox (Available for RCZ1 | RCZ2 | RCZ4)
– NB-IoT. -
MOTO TRACKER
Wireless sensor installed in motorcycles that transmits their location in a periodical way. Is it possible to activate up to 5 geofences for each sensor. It sends notifications via email and SMS.
-
NANOFOX IOT KIT
NANOFOX IoT Kit is an evaluation board for Sigfox connectivity using WISOL serial modem. It provides out-of-the-box connection with Arduino NANO / PRO boards, accelerating the learning curve and validation of new ideas, business models, and product concepts.
Main Features:
+ Connector compatible with Arduino NANO and PRO boards
+ I/Os for external use (i.e.: Shields interface, sensors, etc.)
+ Ease integration with any hardware platform through UART and simple AT commands. (ESP8266, ESP32, Raspberry PI, PIC, AVR, Texas, STM32, PC, etc)
+ Ultra-low power allows battery operation for long periods
+ WISOL Sigfox verified module for region RCZ2 – USA/Mexico/Brazil/Canada
+ 1 year of Sigfox connection included with access to Sigfox Backend tools. -
PMS-100
The PMS-100 is a multi-sensor device, designed to be employed by customers and companies wishing to implement an Internet of Things (IoT) radio-based monitoring tool.
The PMS-100 is a ready-to-use and easy-to-install multi-sensor device, designed to act as a data collector in a wide range of applications. All the data collected can then be used to identify faults and optimize multiple aspects in production lines, by logging a complete history of diverse variables and allowing the user to analyze and draw conclusions from it.
- 1
- 2