Showing all 12 results
-
Digitanimal
Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.
-
Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.
-
Dry Contact Sensor
The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.
-
Iris
IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.
Sensorization
IRIS devices allow consumption detection in two possible ways:
• Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
• Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.Communications
IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.Functionality
Operating profiles based on the requirements for recording historical consumption and communications.
• Normal-24: Sending data every 24 hours and recording every hour.
• Normal-8: Sending data every 8 hours and recording every hour.
• Medium: Data is sent every 12 hours and registration every 30 minutes.
• Extreme: Sending data every 6 hours and recording every 15 minutes.Alarms
Detection of alarms and their dispatch. Supported alarms:
Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
Under-dimensioned meter alarm: The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
Leak alarm: The alarm is activated in the event that continued consumption is detected for a maximum period of time.
Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
Counter stopped alarm: The alarm is activated in the event that no consumption is detected for a maximum period of time.
Battery status alarms: Various battery alarm levels are activated depending on the remaining autonomy.Communications
The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.Data collection and management
• Access to a large amount of data recorded by the system
• Advanced data analysis from consumption graphs.
• Direct access to information from temporary records.Web system
• Detection and management of alerts for the detection of error situations and their agile solution.
• Running automatic programs
• Security and privacy in access to information guaranteed at various levels.For more information visit: https://hidroconta.com/
-
MeteoHelix® IoT weather station
We shrunk a professional solar powered meteorological weather station costing 2950 EUR into a compact micro-weather station costing 1/6th the price using new IoT wireless technologies and sensors. Featuring a patented helical design, MeteoHelix® is the only micro-weather station able to meet quality standards for climatic observations in all weather conditions as set by the World Meteorological Organization (WMO). Measures temperature, humidity, pressure, sun intensity (irradiation), rain. MeteoWind sensor coming soon.
allMETEO Web portal is free with the purchase of a MeteoHelix® personal weather station by BARANI DESIGN Technologies.
-
Quamtra Smart Waste Management
This IoT solution is based on smart devices (the Q and MiniQ sensors) that constantly measure the fill level of the garbage containers, the temperature inside them, the inclination, the movement and even their location. This data is sent to the platform that allows the creation of reports and alerts to transform it into actions by those responsible for the management.
-
Real-time Warning on Radiation Frost
Know when a radiation frost events occurs – get an alert on potential frost damages to your crops.
The Real-time Warning on Radiation Frost Events solution includes:
– Leaf and bud temperature sensor
– battery-powered wireless data transmitter (no solar panel needed)
– GPS
– 1-year connectivity license (optional)
– 1-year CIS (cloud integration services) subscription -
Simple Leak – Water Leak Detector
Reliable, no false alarms
Solid gold-plated contacts
Cool, small, clever design
Waterproof IP67 and sending while floating
Lasting over 10 years
Loud alarm buzzer
Movement or flip warning (accelerometer inside)
End of leak detection and reportingSize: 60x60x60mm
Sigfox power radiation Class 0
Documented payloads and remote configuration
Firmware upgrade available (no disassembly needed)
UV print branding and paper packaging available at extra charge – contact us with your inquiry
Full featured demo platform iofrog.com available and support of tens of other IoT platforms
Temperature threshold alarms (antifreeze, overheat)
Incredible radio performance -
SimplePack 3.0 Plus WiFi tracker
SimplePack 3.0 Plus WiFi tracker is a multi-sensor Sigfox IoT device that can be used to track, trace and guard your assets.
Usage scenario: Well known routes and timings, not critically sensitive to work and to switch to proper time zone with border crossingThe additional Wi-Fi sniffing allows for more precise localization of the device, which is very helpful in warehouses and in every situation that requires knowing the exact position.
Sensors:
Accelerometer
Clicking button with haptic feedback
Ambi temperature
WiFi – for localization through MAC address sniffingDevice specifications:
Small form-factor – size: 81 x 29 x 12mm
Non-rechargeable, non-replaceable long-lasting battery – 30 000 messages (typical battery life in active Guard me WiFi 10 years)
Open and documented API (can be found right here)
Nice, small, waterproof case
Official IP68 water and dust resistance rating
UV print branding and paper packaging available at an extra charge – contact us with your inquiryIoT platform:
The most advanced Sigfox platform IOFrog.com available for your use (3 months free trial)
Support of tens of other IoT platforms, multi-language support, all devices in one place
Map view – Custom markers based on device status, tracing the history, the difference between the home position and current position
Notifications – SMS and E-mail notifications set on device level
Android & iOS mobile apps -
SimplePack Plus 3.0 Full
A universal device that integrators can build their IoT solutions upon
The smallest and cheapest Sigfox device, lasting 10 years on a battery.– Small form-factor – size: 81 x 29 x 12mm
– Non-rechargeable, non-replaceable long-lasting battery – 30 000 messages (typical lifetime in guard mode – 10 years)
– Nice, small, waterproof case (IP68 rating)
– UV print branding and paper packaging available at an extra charge – contact us with your inquiry -
TagoIO IoT Cloud Platform
TagoIO offers an end-to-end cloud platform that transforms the way businesses create value from connected products.
TagoIO integrates advanced device management, data storage, visualization, analytics, and more. It requires a minimum effort for setup and operation. Under the PaaS model, Tago contains all the functionalities to perform: device management, data storage, real-time data visualization, custom analytics, and notifications. To accelerate the time-to-market, Tago comes with a mobile App and a white-label option to enable higher level of customization.
Our well-designed User Interface allows non-technical personal to prepare and sell solutions quickly and easily. From our headquarters in Raleigh, NC, USA, we support local and international businesses to build the best solution.
-
WISOL Breakout Board
Not everyone needs the LEDs on the breakout, so by offering this product we can reduce the cost of starting on the Sigfox Network.
This is a breakout board with the Wisol WSSFM10R2 Sigfox module. Use it on any development platform. It communicates over UART and it is very easy to use. Simple serial commands to fill the buffer are used. This is a 3.3V system, do not power it with 5V. You can mount this breakout on our Arduino Uno shield to make your development easy.
Do not forget to pick up your antenna kit.For Examples and Design Information visit our Github Repository https://github.com/SeaSlugLabs.
Enjoy 2 free years of Sigfox service with this breakout.