fbpx

Showing 1–18 of 46 results

  • Acceleration-Based Movement Sensor

    The acceleration-based movement sensor uses an internal accelerometer to detect movement of an asset. When motion is detected that exceeds a certain threshold, an alert is sent over the wireless network.

    Product Brief

    More about Radio Bridge

  • Air Temperature and Humidity Sensor

    By Radio Bridge.

    The air temperature and humidity sensor uses air flow to measure temperature and humidity levels. If the temperature and/or humidity rises above or falls below the configured thresholds, an alert is sent over the wireless network.

    Product Brief

    More about Radio Bridge

  • Digital Rain Gauge

    Agrosmart’s digital rain gauge monitors real-time rainfall data and sends it over to the internet. The Agrosmart online app provides rainfall information in real time and distribution through digital maps. By using the system farmers are able to improve decision-making, resulting on higher planting and harvesting efficiency as well as input and labour cost reduction.

    Features:
    – Real time rainfall monitoring
    – Rainfall historical data
    – Distribution maps (available only when the number of digital rain gauges is equal or superior to 4 units)
    – End-to-end solution: installation, maintenance and customer support
    – No need for cell phone or internet signal in the field / SigFox Connection enabled

  • Agriculture

    Digitanimal

    Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.

  • Door/Window Sensor

    The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.

    Product brief.

    More about Radio Bridge

  • Dry Contact Sensor

    The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.

    Product Brief

    More about Radio Bridge

  • Duodigit SX

    The DUODIGIT SX is a ready to use, rugged and easy-to-install equipment designed to transmit meter Reading data (water, gas and power) through the LPWA Sigfox network. The equipment can also be used in alarm systems and event occurrences. It has a primary Thionyl Chloride Lithium battery of 6500mA to operate for several years according to the number of daily transmissions.

    APPLICATIONS:

    • Water metering system
    • Gas metering system
    • Power measurement system
    • Alarms
    • Event detector.

    Product developed and produced by Duodigit, a pioneer Brazilian company in the use of SIGFOX technology that has a specialized technical team trained in France.

  • EFCMPM01

    Energyment®is a proprietary platform do manage consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time and generates usage reports.Energyment® can report your connected devices measures 2 to 96 times a day, everyday, the consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time, and generate monthly usage.

  • EG-IoT

    Products of the EG-IoT range are suitable for rugged external environment. They are all waterproof and shock-resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, we provide a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.
    The EG-IoT embedded application allows all geolocation applications like geofencing alert, keeping alive information and motion detection. It can be used to monitor a large number of assets and their condition of use or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.

    Its physical connection allows the receipt of sensors’ information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.

    The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.

  • EG-IoT 8AA6 Telemetry

    Products of the EG-IoT range are suitable for rugged external environment . They are all waterproof and shock- resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, provides a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.

    The EG-IoT embedded application allows all geolocation applications like geofencing alert, keep alive information and motion detection. It could be used to monitor a large number of assets and their condition of use (as for one of our customer which rents equipments for public works) or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.

    Thourgh its physical connection, which allows the receipt of sensors information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.

    The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.

  • Embedded Devkit (EDK)

    High-powered development kit that can be used as a POC platform to develop and try out your solution, or as a maker’s ground for experimenting.

     

  • External Probe Temperature Sensor

    The external probe temperature sensor measures temperature using an external temperature probe. If the temperature rises above or falls below the configured thresholds, an alert is sent over the wireless network.

    Product Brief

    More about Radio Bridge

  • Firefly

    Firefly Sigfox is a cutting-edge solution to improve time response to fuse cut out in MV lines in the field.

  • Getrak FOX

    Getrak FOX is a small device with a battery designed to track vehicles, people, pets, loads and utilities. It is easy to install and its battery can last up to 2 years. The device works with Getrak tracking platform and a Deep Track machine learning platform where you can track the device, generate reports and manage the alerts.

  • GLOKE Asset Tracking

    GLOKE self-sufficient asset tracking device, ideal due to the low installation cost and no maintenance. The device is designed with all automotive standards to last in toughest environments. As standard GLOKE will send 140 messages a day (one message every 11 minutes).

    If the device can’t be exposed to the light, we offer an alternative version, which comes with ability to connect DC input or run on internal battery pack. Battery pack will last, depend on send message frequency up to 10 years.

    There is no GSM tracker which could compete with GLOKE.

    Main device functionality :
    • Self-sufficient device, with additional power supply option
    • Up to 140 messages per day
    • Long lasting battery, depend on send message frequency up to 10 years

    Main platform functionality :
    • API for 3rd party software integration
    • Reporting
    • Geofence function
    • Overall map with location of all customer assets
    • Detailed map per device, ability to
    • Check current location address
    • Check battery status
    • Check temperature status
    • Check history – this gives travel log

    W: www.gloksystems.co.uk
    @: info@gloksystems.co.uk
    T: 01842 646003

  • Iris Hidroconta

    Iris

    IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.

    Sensorization
    IRIS devices allow consumption detection in two possible ways:
    • Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
    • Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.

    Communications
    IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
    In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
    In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.

    Functionality
    Operating profiles based on the requirements for recording historical consumption and communications.
    • Normal-24: Sending data every 24 hours and recording every hour.
    • Normal-8: Sending data every 8 hours and recording every hour.
    • Medium: Data is sent every 12 hours and registration every 30 minutes.
    • Extreme: Sending data every 6 hours and recording every 15 minutes.

    Alarms
    Detection of alarms and their dispatch. Supported alarms:
    Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
    Under-dimensioned meter alarm    : The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
    Leak alarm    : The alarm is activated in the event that continued consumption is detected for a maximum period of time.
    Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
    Counter stopped alarm    : The alarm is activated in the event that no consumption is detected for a maximum period of time.
    Battery status alarms    : Various battery alarm levels are activated depending on the remaining autonomy.

    Communications
    The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.

    From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
    etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.

    Data collection and management
    • Access to a large amount of data recorded by the system
    • Advanced data analysis from consumption graphs.
    • Direct access to information from temporary records.

    Web system
    • Detection and management of alerts for the detection of error situations and their agile solution.
    • Running automatic programs
    • Security and privacy in access to information guaranteed at various levels.

    For more information visit: https://hidroconta.com/

  • LOKA AXON

    Expandable Tracking Monitoring Solution.

    The most expandable device of the LOKA Solutions portfolio. It was thought to facilitate the connection with other sensors. It will face demanding situations. It will transmit impulses to the LOKA’s IoT Cloud platform. On top of all it has more battery life.

    Expansion characteristics are: Standard 2.54 header pin Wire terminal Groove connector SDK .

    Auto switch in all RCZ Regions.

    LOKA NEURON Inside.

    LOKA AXON devices are managed in the LOKA MIND IoT Cloud Platform.

  • LOKA INCUS

    LPG Canister & Beer Keg Tracker with filling level measurement.

    The solution for use cases that need to measure level inside a recipient, more specifically kegs and canisters. This device reads the level of filling and allows you to know how full or empty your asset is.

    Auto switch in all RCZ Regions.

    LOKA NEURON Inside.

    LOKA INCUS devices are managed in the LOKA MIND IoT Cloud Platform.