Showing 1–18 of 31 results
-
Alert Press
The button can be used in a fixed place or with a geolocation service activated.
When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on. -
Animal Tracker
This collar can be used in any kind of animal.
It is composed by a wireless sensor that transmits their location in a periodical way.
Can be used with 5 geofences for each sensor.
It sends notifications via email and SMS.
-
Cold Tracker
Wireless sensor installed in refrigerators for monitoring temperature in a periodical way.
In addition, it senses the refrigerator’s location.
It sends notifications via email and SMS.
-
Digitanimal
Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.
-
EFCMPM01
Energyment®is a proprietary platform do manage consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time and generates usage reports.Energyment® can report your connected devices measures 2 to 96 times a day, everyday, the consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time, and generate monthly usage.
-
EG-IoT
Products of the EG-IoT range are suitable for rugged external environment. They are all waterproof and shock-resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, we provide a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.
The EG-IoT embedded application allows all geolocation applications like geofencing alert, keeping alive information and motion detection. It can be used to monitor a large number of assets and their condition of use or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.Its physical connection allows the receipt of sensors’ information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.
The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.
-
EG-IoT 8AA6 Telemetry
Products of the EG-IoT range are suitable for rugged external environment . They are all waterproof and shock- resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, provides a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.
The EG-IoT embedded application allows all geolocation applications like geofencing alert, keep alive information and motion detection. It could be used to monitor a large number of assets and their condition of use (as for one of our customer which rents equipments for public works) or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.
Thourgh its physical connection, which allows the receipt of sensors information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.
The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.
-
Electronic Active Seal
Our security electronic seal makes easier, faster, cheaper and safer, the chance to have a real-time notification over the opening or violation of cargo or any kind of seal, by using an opening alarm generated by the security electronic seal.
The installation is quite simple and an important difference from other current solutions is that it is not necessary to spend money into inverse logistics because it is designed for one use only.
Besides the opening notification, the security electronic seal lets the user monitor the container during established periods of time, showing the seal permanency and the active status of the seal. Its autonomy can last 30 days, but this time depends on the design of each project and the regularity of the transmission.
-
Getrak FOX
Getrak FOX is a small device with a battery designed to track vehicles, people, pets, loads and utilities. It is easy to install and its battery can last up to 2 years. The device works with Getrak tracking platform and a Deep Track machine learning platform where you can track the device, generate reports and manage the alerts.
-
GLOKE Asset Tracking
GLOKE self-sufficient asset tracking device, ideal due to the low installation cost and no maintenance. The device is designed with all automotive standards to last in toughest environments. As standard GLOKE will send 140 messages a day (one message every 11 minutes).
If the device can’t be exposed to the light, we offer an alternative version, which comes with ability to connect DC input or run on internal battery pack. Battery pack will last, depend on send message frequency up to 10 years.
There is no GSM tracker which could compete with GLOKE.
Main device functionality :
• Self-sufficient device, with additional power supply option
• Up to 140 messages per day
• Long lasting battery, depend on send message frequency up to 10 yearsMain platform functionality :
• API for 3rd party software integration
• Reporting
• Geofence function
• Overall map with location of all customer assets
• Detailed map per device, ability to
• Check current location address
• Check battery status
• Check temperature status
• Check history – this gives travel logW: www.gloksystems.co.uk
@: info@gloksystems.co.uk
T: 01842 646003 -
GPS Antijammer IOTR-AJ-001
Designed to detect and act in the presence of a cell phone blocker. Upon detection of a cellphone blocker, a safety protocol will be activated to ensure that the vehicle or transport is recovered.
When it detects a jammer, it will continue to send location information since its
technology allows it to be visible even with Jammer present.This device will send critical information about the
status and gps position so that in a time not exceeding 20 minutes the unit can be located safely.The price includes 1 year of service and connectivity, tracking platform.
Self-management Tracking Platform
Easy to access
Easy installation
1 year warranty against manufacturing defects– Alerts for Jammer’s presence
– Historic up to 90 days
– Programmable reports
– Email alerts, on screen / SMS. -
iButton
iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.
-
LOKA PRIMIS
LOKA’s first low cost / low power tracker, with expansion capabilities.
Focused on asset tracking, with its geolocations capabilities, LOKA PRIMIS wants to show that assets have reflective thought.
LOKA PRIMIS devices are managed in the LOKA MIND IoT Cloud Platform.
This device has an expandable capability that allows one to buy it with an external temperature sensor or GPS.
It also is possible to adapt to one of two different connectivity networks:
– Sigfox (Available for RCZ1 | RCZ2 | RCZ4)
– NB-IoT. -
Lykaner
Dispositivo para rastreo de activos, reporte inteligente de batería, localización WiFi, reporte de temperatura, acelerómetro.
-
MeteoHelix® IoT weather station
We shrunk a professional solar powered meteorological weather station costing 2950 EUR into a compact micro-weather station costing 1/6th the price using new IoT wireless technologies and sensors. Featuring a patented helical design, MeteoHelix® is the only micro-weather station able to meet quality standards for climatic observations in all weather conditions as set by the World Meteorological Organization (WMO). Measures temperature, humidity, pressure, sun intensity (irradiation), rain. MeteoWind sensor coming soon.
allMETEO Web portal is free with the purchase of a MeteoHelix® personal weather station by BARANI DESIGN Technologies.
-
Miniac: Service Button
The one-in-all button. Device + Platform.
Push the button to trigger customizable notifications to alert self-defined recipients.
Rich notifications available (SMS, Instant Messaging…)
Price includes hardware and 1 year of Sigfox connectivity & Miniac (Software).Get in touch:
vtrueba@nxtiot.io
www.nxtiot.ioFind it in-store:
http://www.nxtiot.io/index.php/store/Botones-c30530005 -
MOTO TRACKER
Wireless sensor installed in motorcycles that transmits their location in a periodical way. Is it possible to activate up to 5 geofences for each sensor. It sends notifications via email and SMS.
-
PMS-100
The PMS-100 is a multi-sensor device, designed to be employed by customers and companies wishing to implement an Internet of Things (IoT) radio-based monitoring tool.
The PMS-100 is a ready-to-use and easy-to-install multi-sensor device, designed to act as a data collector in a wide range of applications. All the data collected can then be used to identify faults and optimize multiple aspects in production lines, by logging a complete history of diverse variables and allowing the user to analyze and draw conclusions from it.
- 1
- 2