Showing all 18 results
-
Acceleration-Based Movement Sensor
The acceleration-based movement sensor uses an internal accelerometer to detect movement of an asset. When motion is detected that exceeds a certain threshold, an alert is sent over the wireless network.
-
Air Temperature and Humidity Sensor
By Radio Bridge.
The air temperature and humidity sensor uses air flow to measure temperature and humidity levels. If the temperature and/or humidity rises above or falls below the configured thresholds, an alert is sent over the wireless network.
-
Digitanimal
Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.
-
Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.
-
Dry Contact Sensor
The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.
-
EG-IoT
Products of the EG-IoT range are suitable for rugged external environment. They are all waterproof and shock-resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, we provide a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.
The EG-IoT embedded application allows all geolocation applications like geofencing alert, keeping alive information and motion detection. It can be used to monitor a large number of assets and their condition of use or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.Its physical connection allows the receipt of sensors’ information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.
The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.
-
EG-IoT 8AA6 Telemetry
Products of the EG-IoT range are suitable for rugged external environment . They are all waterproof and shock- resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, provides a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.
The EG-IoT embedded application allows all geolocation applications like geofencing alert, keep alive information and motion detection. It could be used to monitor a large number of assets and their condition of use (as for one of our customer which rents equipments for public works) or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.
Thourgh its physical connection, which allows the receipt of sensors information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.
The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.
-
External Probe Temperature Sensor
The external probe temperature sensor measures temperature using an external temperature probe. If the temperature rises above or falls below the configured thresholds, an alert is sent over the wireless network.
-
GLOKE Asset Tracking
GLOKE self-sufficient asset tracking device, ideal due to the low installation cost and no maintenance. The device is designed with all automotive standards to last in toughest environments. As standard GLOKE will send 140 messages a day (one message every 11 minutes).
If the device can’t be exposed to the light, we offer an alternative version, which comes with ability to connect DC input or run on internal battery pack. Battery pack will last, depend on send message frequency up to 10 years.
There is no GSM tracker which could compete with GLOKE.
Main device functionality :
• Self-sufficient device, with additional power supply option
• Up to 140 messages per day
• Long lasting battery, depend on send message frequency up to 10 yearsMain platform functionality :
• API for 3rd party software integration
• Reporting
• Geofence function
• Overall map with location of all customer assets
• Detailed map per device, ability to
• Check current location address
• Check battery status
• Check temperature status
• Check history – this gives travel logW: www.gloksystems.co.uk
@: info@gloksystems.co.uk
T: 01842 646003 -
GOBLIN 2 Plus Sigfox
Embrace the possibilities of the IoT.
Lower energy consumption due to simplified network communications. Affordable data plan prices that can go as low as 5 USD a year, transmitting up to 140 messages a day. -
Miniac: Service Button
The one-in-all button. Device + Platform.
Push the button to trigger customizable notifications to alert self-defined recipients.
Rich notifications available (SMS, Instant Messaging…)
Price includes hardware and 1 year of Sigfox connectivity & Miniac (Software).Get in touch:
vtrueba@nxtiot.io
www.nxtiot.ioFind it in-store:
http://www.nxtiot.io/index.php/store/Botones-c30530005 -
Probeless Temperature Sensor
The probeless temp sensor measures the temperature of the air surrounding the sensor without any external probes such as a thermocouple or thermistor. If the temperature rises above or falls below the configured thresholds, an alert is sent over the wireless network. For high precision temperature monitoring, see the external probe temperature sensor or the thermocouple-based temperature sensor.
-
Push Button
The single push button sensor can be used as a panic button, personal emergency response (PERS), remote control, or other remote push-button applications. When the button is pressed, an alert is sent to the wireless network.
-
Real-time Warning on Radiation Frost
Know when a radiation frost events occurs – get an alert on potential frost damages to your crops.
The Real-time Warning on Radiation Frost Events solution includes:
– Leaf and bud temperature sensor
– battery-powered wireless data transmitter (no solar panel needed)
– GPS
– 1-year connectivity license (optional)
– 1-year CIS (cloud integration services) subscription -
SimplePack 3.0 Plus WiFi tracker
SimplePack 3.0 Plus WiFi tracker is a multi-sensor Sigfox IoT device that can be used to track, trace and guard your assets.
Usage scenario: Well known routes and timings, not critically sensitive to work and to switch to proper time zone with border crossingThe additional Wi-Fi sniffing allows for more precise localization of the device, which is very helpful in warehouses and in every situation that requires knowing the exact position.
Sensors:
Accelerometer
Clicking button with haptic feedback
Ambi temperature
WiFi – for localization through MAC address sniffingDevice specifications:
Small form-factor – size: 81 x 29 x 12mm
Non-rechargeable, non-replaceable long-lasting battery – 30 000 messages (typical battery life in active Guard me WiFi 10 years)
Open and documented API (can be found right here)
Nice, small, waterproof case
Official IP68 water and dust resistance rating
UV print branding and paper packaging available at an extra charge – contact us with your inquiryIoT platform:
The most advanced Sigfox platform IOFrog.com available for your use (3 months free trial)
Support of tens of other IoT platforms, multi-language support, all devices in one place
Map view – Custom markers based on device status, tracing the history, the difference between the home position and current position
Notifications – SMS and E-mail notifications set on device level
Android & iOS mobile apps -
Smart photocontrol
Lighting on and off unit based on sunlight in the environment, with monitoring of electrical parameters and remote programming of delays on and off before or after sunrise and sunset. It has the ability to control intensity dimming with programmable times in luminaires prepared with 0 10 volt input with 7-way standard socket base. Auxiliary device for service departments and lighting maintenance.
-
Tilt Sensor
The tilt sensor uses an accelerometer to detect transitions between horizontal and vertical orientation, as well as reporting the angle of tilt. When the sensor is rotated from horizontal to vertical or visa versa, an alert is sent to the wireless network. The thresholds for triggering a tilt event are configurable over the air.
-
Water Leak Sensor
The water leak sensor uses a water sensor probe to detect the presence of water or other liquids. When the presence of water or another liquid is detected, an alert is sent to the wireless network.
