Showing 1–18 of 20 results
-
Alert Press
The button can be used in a fixed place or with a geolocation service activated.
When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on. -
Animal Tracker
This collar can be used in any kind of animal.
It is composed by a wireless sensor that transmits their location in a periodical way.
Can be used with 5 geofences for each sensor.
It sends notifications via email and SMS.
-
Cold Tracker
Wireless sensor installed in refrigerators for monitoring temperature in a periodical way.
In addition, it senses the refrigerator’s location.
It sends notifications via email and SMS.
-
Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.
-
Dry Contact Sensor
The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.
-
EG-IoT
Products of the EG-IoT range are suitable for rugged external environment. They are all waterproof and shock-resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, we provide a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.
The EG-IoT embedded application allows all geolocation applications like geofencing alert, keeping alive information and motion detection. It can be used to monitor a large number of assets and their condition of use or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.Its physical connection allows the receipt of sensors’ information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.
The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.
-
EG-IoT 8AA6 Telemetry
Products of the EG-IoT range are suitable for rugged external environment . They are all waterproof and shock- resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, provides a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.
The EG-IoT embedded application allows all geolocation applications like geofencing alert, keep alive information and motion detection. It could be used to monitor a large number of assets and their condition of use (as for one of our customer which rents equipments for public works) or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.
Thourgh its physical connection, which allows the receipt of sensors information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.
The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.
-
Electronic Active Seal
Our security electronic seal makes easier, faster, cheaper and safer, the chance to have a real-time notification over the opening or violation of cargo or any kind of seal, by using an opening alarm generated by the security electronic seal.
The installation is quite simple and an important difference from other current solutions is that it is not necessary to spend money into inverse logistics because it is designed for one use only.
Besides the opening notification, the security electronic seal lets the user monitor the container during established periods of time, showing the seal permanency and the active status of the seal. Its autonomy can last 30 days, but this time depends on the design of each project and the regularity of the transmission.
-
GLOKE Asset Tracking
GLOKE self-sufficient asset tracking device, ideal due to the low installation cost and no maintenance. The device is designed with all automotive standards to last in toughest environments. As standard GLOKE will send 140 messages a day (one message every 11 minutes).
If the device can’t be exposed to the light, we offer an alternative version, which comes with ability to connect DC input or run on internal battery pack. Battery pack will last, depend on send message frequency up to 10 years.
There is no GSM tracker which could compete with GLOKE.
Main device functionality :
• Self-sufficient device, with additional power supply option
• Up to 140 messages per day
• Long lasting battery, depend on send message frequency up to 10 yearsMain platform functionality :
• API for 3rd party software integration
• Reporting
• Geofence function
• Overall map with location of all customer assets
• Detailed map per device, ability to
• Check current location address
• Check battery status
• Check temperature status
• Check history – this gives travel logW: www.gloksystems.co.uk
@: info@gloksystems.co.uk
T: 01842 646003 -
iButton
iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.
-
LOKA PRIMIS
LOKA’s first low cost / low power tracker, with expansion capabilities.
Focused on asset tracking, with its geolocations capabilities, LOKA PRIMIS wants to show that assets have reflective thought.
LOKA PRIMIS devices are managed in the LOKA MIND IoT Cloud Platform.
This device has an expandable capability that allows one to buy it with an external temperature sensor or GPS.
It also is possible to adapt to one of two different connectivity networks:
– Sigfox (Available for RCZ1 | RCZ2 | RCZ4)
– NB-IoT. -
Lykaner
Dispositivo para rastreo de activos, reporte inteligente de batería, localización WiFi, reporte de temperatura, acelerómetro.
-
MOTO TRACKER
Wireless sensor installed in motorcycles that transmits their location in a periodical way. Is it possible to activate up to 5 geofences for each sensor. It sends notifications via email and SMS.
-
PMS-100
The PMS-100 is a multi-sensor device, designed to be employed by customers and companies wishing to implement an Internet of Things (IoT) radio-based monitoring tool.
The PMS-100 is a ready-to-use and easy-to-install multi-sensor device, designed to act as a data collector in a wide range of applications. All the data collected can then be used to identify faults and optimize multiple aspects in production lines, by logging a complete history of diverse variables and allowing the user to analyze and draw conclusions from it.
-
Sensify’s IoT Platform
The Sensify IoT Platform for Connected Assets and Blockchain is a versatile IoT platform that incorporates asset tracking, telematics, and sensorization techniques to grant enterprises and companies real-time insight and control of their entire businesses. The platform links together advanced inventory management solutions, data analytics, machine learning, sensorization techniques, and device data in one easy-to-grasp tool to analyze, control, and improve business efficiency.
-
SigPark
SigPark is a LPWA device operating with Sigfox network, which basically detects parking slot status, by the detection of metallic mass with the use of magnetic sensor. It has an internal battery that can last up to 5 years.
-
SigSense
SigSense is a LPWA device operating in Sigfox network, with the main purpose of monitoring operating time of machines by the detection of vibrations, to be used both indoor and outdoor. It has an internal battery that can last up to 5 years.
-
SimplePack 3.0 Plus WiFi tracker
SimplePack 3.0 Plus WiFi tracker is a multi-sensor Sigfox IoT device that can be used to track, trace and guard your assets.
Usage scenario: Well known routes and timings, not critically sensitive to work and to switch to proper time zone with border crossingThe additional Wi-Fi sniffing allows for more precise localization of the device, which is very helpful in warehouses and in every situation that requires knowing the exact position.
Sensors:
Accelerometer
Clicking button with haptic feedback
Ambi temperature
WiFi – for localization through MAC address sniffingDevice specifications:
Small form-factor – size: 81 x 29 x 12mm
Non-rechargeable, non-replaceable long-lasting battery – 30 000 messages (typical battery life in active Guard me WiFi 10 years)
Open and documented API (can be found right here)
Nice, small, waterproof case
Official IP68 water and dust resistance rating
UV print branding and paper packaging available at an extra charge – contact us with your inquiryIoT platform:
The most advanced Sigfox platform IOFrog.com available for your use (3 months free trial)
Support of tens of other IoT platforms, multi-language support, all devices in one place
Map view – Custom markers based on device status, tracing the history, the difference between the home position and current position
Notifications – SMS and E-mail notifications set on device level
Android & iOS mobile apps
- 1
- 2