Showing all 17 results
-
Alert Press
The button can be used in a fixed place or with a geolocation service activated.
When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on. -
Animal Tracker
This collar can be used in any kind of animal.
It is composed by a wireless sensor that transmits their location in a periodical way.
Can be used with 5 geofences for each sensor.
It sends notifications via email and SMS.
-
Cold Tracker
Wireless sensor installed in refrigerators for monitoring temperature in a periodical way.
In addition, it senses the refrigerator’s location.
It sends notifications via email and SMS.
-
Datalog IOT
Multi sensor device for remote monitoring system
Intelligent and easy configurable APP and WEB monitoring applications, plus local sensing devices set for humidity and temperature measuring.
To expand base sensing capabilities, solicit any desired sensor (such as PT100 RTDs, Thermocouples, CO2 sensors, etc.) to OEM.Features
+ Visualization
+ Responsive WEB and APP interface for visualization of:- Sensed variable state.
- Battery level.
- AC connector.
- Sigfox signal quality.
- Graphic record of each variable for up to 2 years.
+ External alarms by SMS, e-mail and Telegram messaging service.
-
Electronic Active Seal
Our security electronic seal makes easier, faster, cheaper and safer, the chance to have a real-time notification over the opening or violation of cargo or any kind of seal, by using an opening alarm generated by the security electronic seal.
The installation is quite simple and an important difference from other current solutions is that it is not necessary to spend money into inverse logistics because it is designed for one use only.
Besides the opening notification, the security electronic seal lets the user monitor the container during established periods of time, showing the seal permanency and the active status of the seal. Its autonomy can last 30 days, but this time depends on the design of each project and the regularity of the transmission.
-
GPS Antijammer IOTR-AJ-001
Designed to detect and act in the presence of a cell phone blocker. Upon detection of a cellphone blocker, a safety protocol will be activated to ensure that the vehicle or transport is recovered.
When it detects a jammer, it will continue to send location information since its
technology allows it to be visible even with Jammer present.This device will send critical information about the
status and gps position so that in a time not exceeding 20 minutes the unit can be located safely.The price includes 1 year of service and connectivity, tracking platform.
Self-management Tracking Platform
Easy to access
Easy installation
1 year warranty against manufacturing defects– Alerts for Jammer’s presence
– Historic up to 90 days
– Programmable reports
– Email alerts, on screen / SMS. -
iButton
iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.
-
Iris
IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.
Sensorization
IRIS devices allow consumption detection in two possible ways:
• Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
• Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.Communications
IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.Functionality
Operating profiles based on the requirements for recording historical consumption and communications.
• Normal-24: Sending data every 24 hours and recording every hour.
• Normal-8: Sending data every 8 hours and recording every hour.
• Medium: Data is sent every 12 hours and registration every 30 minutes.
• Extreme: Sending data every 6 hours and recording every 15 minutes.Alarms
Detection of alarms and their dispatch. Supported alarms:
Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
Under-dimensioned meter alarm: The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
Leak alarm: The alarm is activated in the event that continued consumption is detected for a maximum period of time.
Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
Counter stopped alarm: The alarm is activated in the event that no consumption is detected for a maximum period of time.
Battery status alarms: Various battery alarm levels are activated depending on the remaining autonomy.Communications
The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.Data collection and management
• Access to a large amount of data recorded by the system
• Advanced data analysis from consumption graphs.
• Direct access to information from temporary records.Web system
• Detection and management of alerts for the detection of error situations and their agile solution.
• Running automatic programs
• Security and privacy in access to information guaranteed at various levels.For more information visit: https://hidroconta.com/
-
Levelgas
Levelgas is a gas level wireless sensor for propane tanks. With it, you can check your gas level from your smartphone, calculate and follow in real time the refill of your tank, know your consumptions habits and manage your refills according your needs.
-
Lykaner
Dispositivo para rastreo de activos, reporte inteligente de batería, localización WiFi, reporte de temperatura, acelerómetro.
-
MeteoHelix® IoT weather station
We shrunk a professional solar powered meteorological weather station costing 2950 EUR into a compact micro-weather station costing 1/6th the price using new IoT wireless technologies and sensors. Featuring a patented helical design, MeteoHelix® is the only micro-weather station able to meet quality standards for climatic observations in all weather conditions as set by the World Meteorological Organization (WMO). Measures temperature, humidity, pressure, sun intensity (irradiation), rain. MeteoWind sensor coming soon.
allMETEO Web portal is free with the purchase of a MeteoHelix® personal weather station by BARANI DESIGN Technologies.
-
Miniac: Service Button
The one-in-all button. Device + Platform.
Push the button to trigger customizable notifications to alert self-defined recipients.
Rich notifications available (SMS, Instant Messaging…)
Price includes hardware and 1 year of Sigfox connectivity & Miniac (Software).Get in touch:
vtrueba@nxtiot.io
www.nxtiot.ioFind it in-store:
http://www.nxtiot.io/index.php/store/Botones-c30530005 -
MOTO TRACKER
Wireless sensor installed in motorcycles that transmits their location in a periodical way. Is it possible to activate up to 5 geofences for each sensor. It sends notifications via email and SMS.
-
Quamtra Smart Waste Management
This IoT solution is based on smart devices (the Q and MiniQ sensors) that constantly measure the fill level of the garbage containers, the temperature inside them, the inclination, the movement and even their location. This data is sent to the platform that allows the creation of reports and alerts to transform it into actions by those responsible for the management.
-
-
ST710
The ST 710 is an economical waterproof tracking device utilizing Sigfox and GPS technologies. To meet clients’ needs for markets of insurance and fleet management in terms of in terms of recovery of stolen vehicle, the ST 710 is designed and deployed with its efficiently cost -competitive components like a simplified event line consisting of 2 lines that can be configured either as input or output and 1-wire bus for temperature.
3 Modes (Parking, driving, emergency) Detecting lgnition by Wire or Accelerometer IP67 Compliant
OTA Configurations/Commands
Odometer / Hourmeter in to tal, in partial
1-Wire temp sensor monitoring -
UnaProtect
Protect uses a magnetic sensor to detect opening and closing of doors , windows or drawers. Designed to remotely monitor your assets or access to places.
Easy to set up.
Low cost and high performance.
Small and compact.
Low power consumption.
Plug and play.
Reliable detection.