Showing 1–18 of 22 results
-
Duodigit SX
The DUODIGIT SX is a ready to use, rugged and easy-to-install equipment designed to transmit meter Reading data (water, gas and power) through the LPWA Sigfox network. The equipment can also be used in alarm systems and event occurrences. It has a primary Thionyl Chloride Lithium battery of 6500mA to operate for several years according to the number of daily transmissions.
APPLICATIONS:
- Water metering system
- Gas metering system
- Power measurement system
- Alarms
- Event detector.
Product developed and produced by Duodigit, a pioneer Brazilian company in the use of SIGFOX technology that has a specialized technical team trained in France.
-
EFCMPM01
Energyment®is a proprietary platform do manage consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time and generates usage reports.Energyment® can report your connected devices measures 2 to 96 times a day, everyday, the consumption of Cubic Meter of Water and Gas, or a kWh energy usage over a period of time, and generate monthly usage.
-
EG-IoT
Products of the EG-IoT range are suitable for rugged external environment. They are all waterproof and shock-resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, we provide a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.
The EG-IoT embedded application allows all geolocation applications like geofencing alert, keeping alive information and motion detection. It can be used to monitor a large number of assets and their condition of use or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.Its physical connection allows the receipt of sensors’ information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.
The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.
-
EG-IoT 8AA6 Telemetry
Products of the EG-IoT range are suitable for rugged external environment . They are all waterproof and shock- resistant. Their compact size, their wide-range integrated antennas and their long autonomy allow an easy installation and use. Equiped with two communication technologies Sigfox + 3G or Sigfox + LTE-M1, provides a product dedicated to critical applications. The EG-IoT solutions are a concentrate of technology, some of which were patented by Ercogener.
The EG-IoT embedded application allows all geolocation applications like geofencing alert, keep alive information and motion detection. It could be used to monitor a large number of assets and their condition of use (as for one of our customer which rents equipments for public works) or to check if your product has reached a specific location (port, aeroport, harbour, city, etc). Another main application is to detect when your asset starts a movement to prevent theft or banned uses.
Thourgh its physical connection, which allows the receipt of sensors information and the control of actuators, it is used for building monitoring, solar production, smart agriculture and industry 4.0 applications. The most demanding applications as well as the simplest ones are covered by the EG-IoT range: get an index for gaz or water meters, cold chain monitoring, weather information, preventive maintenance, etc. For example it is used by one of our customer to send an alert when the temperature get under zero degrees within vineyards or to measure time of use of a machine for maintenance purpose.
The technical and business support team from ercogener could help you to define the best solution and quickly start the implementation of EG-IoT products. We can also provide you a global end-to-end connectivity solution to display and manage the data for you.
-
GLOKE Asset Tracking
GLOKE self-sufficient asset tracking device, ideal due to the low installation cost and no maintenance. The device is designed with all automotive standards to last in toughest environments. As standard GLOKE will send 140 messages a day (one message every 11 minutes).
If the device can’t be exposed to the light, we offer an alternative version, which comes with ability to connect DC input or run on internal battery pack. Battery pack will last, depend on send message frequency up to 10 years.
There is no GSM tracker which could compete with GLOKE.
Main device functionality :
• Self-sufficient device, with additional power supply option
• Up to 140 messages per day
• Long lasting battery, depend on send message frequency up to 10 yearsMain platform functionality :
• API for 3rd party software integration
• Reporting
• Geofence function
• Overall map with location of all customer assets
• Detailed map per device, ability to
• Check current location address
• Check battery status
• Check temperature status
• Check history – this gives travel logW: www.gloksystems.co.uk
@: info@gloksystems.co.uk
T: 01842 646003 -
GPS Antijammer IOTR-AJ-001
Designed to detect and act in the presence of a cell phone blocker. Upon detection of a cellphone blocker, a safety protocol will be activated to ensure that the vehicle or transport is recovered.
When it detects a jammer, it will continue to send location information since its
technology allows it to be visible even with Jammer present.This device will send critical information about the
status and gps position so that in a time not exceeding 20 minutes the unit can be located safely.The price includes 1 year of service and connectivity, tracking platform.
Self-management Tracking Platform
Easy to access
Easy installation
1 year warranty against manufacturing defects– Alerts for Jammer’s presence
– Historic up to 90 days
– Programmable reports
– Email alerts, on screen / SMS. -
Iris
IRIS devices allow mechanical meters to access the world of IoT communications. Its great versatility allows it to be integrated with a wide range of meters even from different manufacturers.
Sensorization
IRIS devices allow consumption detection in two possible ways:
• Inductive sensorization: HIDROCONTA meters from the ATLANTIS and TRITON ranges.
• Connected to a pulse emitter: Any mechanical meter that has a potential-free contact pulse emitter (for example, reed relay) can be connected to the pulse input of the IRIS device. It is also possible to connect it to a pulse emitter or any device that generates an electronic pulse signal.Communications
IRIS devices are available in the most demanded IoT communication technologies: Sigfox, LoRa / LoRaWAN, NB-IoT and GPRS.
In all cases, they are integrated as new devices in the DEMETER remote control and remote reading system.
In other words, the diversity of communication technologies in IRIS devices corresponds to their integration in the same installation. Thus, depending on the specific requirements of an installation, different technologies could coexist to achieve a complete solution, always through the same family of IRIS devices.Functionality
Operating profiles based on the requirements for recording historical consumption and communications.
• Normal-24: Sending data every 24 hours and recording every hour.
• Normal-8: Sending data every 8 hours and recording every hour.
• Medium: Data is sent every 12 hours and registration every 30 minutes.
• Extreme: Sending data every 6 hours and recording every 15 minutes.Alarms
Detection of alarms and their dispatch. Supported alarms:
Reverse flow alarm: The alarm is activated in case of exceeding a certain volume in the reverse direction. Only available for the inductive sensor version.
Under-dimensioned meter alarm: The alarm is activated in the event that a flow greater than the overload is detected for a period of time.
Leak alarm: The alarm is activated in the event that continued consumption is detected for a maximum period of time.
Counter tampering alarm: The alarm is activated if the device is not mounted on the meter. Only available for the inductive sensor version.
Counter stopped alarm: The alarm is activated in the event that no consumption is detected for a maximum period of time.
Battery status alarms: Various battery alarm levels are activated depending on the remaining autonomy.Communications
The IRIS communications module is integrated with the Demeter system. It supports the integration of a wide range of devices using various communication technologies that adapt to the needs of the installation. From drinking water meter devices with ultrasonic technology to Demeter remote control devices, through AMR systems coupled to mechanical meters.From a communications point of view, the Demeter system integrates with the vast majority of communication technologies currently on the market: Sigfox, LoRaWAN, NB-IoT, GPRS,
etc. This versatility allows the system to integrate a more suitable measuring device depending on the particularities of the location.Data collection and management
• Access to a large amount of data recorded by the system
• Advanced data analysis from consumption graphs.
• Direct access to information from temporary records.Web system
• Detection and management of alerts for the detection of error situations and their agile solution.
• Running automatic programs
• Security and privacy in access to information guaranteed at various levels.For more information visit: https://hidroconta.com/
-
Levelgas
Levelgas is a gas level wireless sensor for propane tanks. With it, you can check your gas level from your smartphone, calculate and follow in real time the refill of your tank, know your consumptions habits and manage your refills according your needs.
-
LOKA PRIMIS
LOKA’s first low cost / low power tracker, with expansion capabilities.
Focused on asset tracking, with its geolocations capabilities, LOKA PRIMIS wants to show that assets have reflective thought.
LOKA PRIMIS devices are managed in the LOKA MIND IoT Cloud Platform.
This device has an expandable capability that allows one to buy it with an external temperature sensor or GPS.
It also is possible to adapt to one of two different connectivity networks:
– Sigfox (Available for RCZ1 | RCZ2 | RCZ4)
– NB-IoT. -
MeteoHelix® IoT weather station
We shrunk a professional solar powered meteorological weather station costing 2950 EUR into a compact micro-weather station costing 1/6th the price using new IoT wireless technologies and sensors. Featuring a patented helical design, MeteoHelix® is the only micro-weather station able to meet quality standards for climatic observations in all weather conditions as set by the World Meteorological Organization (WMO). Measures temperature, humidity, pressure, sun intensity (irradiation), rain. MeteoWind sensor coming soon.
allMETEO Web portal is free with the purchase of a MeteoHelix® personal weather station by BARANI DESIGN Technologies.
-
Miniac: Service Button
The one-in-all button. Device + Platform.
Push the button to trigger customizable notifications to alert self-defined recipients.
Rich notifications available (SMS, Instant Messaging…)
Price includes hardware and 1 year of Sigfox connectivity & Miniac (Software).Get in touch:
vtrueba@nxtiot.io
www.nxtiot.ioFind it in-store:
http://www.nxtiot.io/index.php/store/Botones-c30530005 -
PMS-100
The PMS-100 is a multi-sensor device, designed to be employed by customers and companies wishing to implement an Internet of Things (IoT) radio-based monitoring tool.
The PMS-100 is a ready-to-use and easy-to-install multi-sensor device, designed to act as a data collector in a wide range of applications. All the data collected can then be used to identify faults and optimize multiple aspects in production lines, by logging a complete history of diverse variables and allowing the user to analyze and draw conclusions from it.
-
Quamtra Smart Waste Management
This IoT solution is based on smart devices (the Q and MiniQ sensors) that constantly measure the fill level of the garbage containers, the temperature inside them, the inclination, the movement and even their location. This data is sent to the platform that allows the creation of reports and alerts to transform it into actions by those responsible for the management.
-
RS2000 SMART SF
This backpack enables a remote operation for reading, connecting & disconnecting and reducing losses for low voltage customers.:
- Monitoring & sensing functionalities, reducing efforts in losses control and diagnosis.
- Field Environment Protection: Intrusive phase sensing. Quality of services to the utility in the benefit of the final customer protection. Notifies the utility in case of voltage in disconnected clients.
- Data Access: Independence, flexibility & convenience in metering data availability. Data are obtained by scheduling and also on demand, including mass memory registered by the SF-Smart – Backpack.
-
Sensify’s IoT Platform
The Sensify IoT Platform for Connected Assets and Blockchain is a versatile IoT platform that incorporates asset tracking, telematics, and sensorization techniques to grant enterprises and companies real-time insight and control of their entire businesses. The platform links together advanced inventory management solutions, data analytics, machine learning, sensorization techniques, and device data in one easy-to-grasp tool to analyze, control, and improve business efficiency.
-
SigPark
SigPark is a LPWA device operating with Sigfox network, which basically detects parking slot status, by the detection of metallic mass with the use of magnetic sensor. It has an internal battery that can last up to 5 years.
-
SigSense
SigSense is a LPWA device operating in Sigfox network, with the main purpose of monitoring operating time of machines by the detection of vibrations, to be used both indoor and outdoor. It has an internal battery that can last up to 5 years.
-
ST730
Portable asset tracking device.
The ST730 combines the Sigfox techonology, the GNSS location, Wifi and other sensors with the Suntech International strong development expertise to bring the first product into the LATAM market to use the Sigfox network.
It features:
+ Periodic location reporting
+ Event triggered reporting
+ Message content customization
+ Local and remote configuration
+ GNSS and Wifi fences
+ Local firmware update
- 1
- 2